James,

I see what you're saying here. Could you recommend a good test scenario to see this 30 sec disconnect?

Right now, my phones are looking at 239.1.1.1 for their MOH, the CUCM Sub is setup to send MMOH out over that IP, but I am blocking multicast from traversing the WAN. I also have SRST setup with the proper MOH commands.

I thought that was enough to test this scenario. Is there something I am missing?

Matthew Berry

/A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Written/

*Gmail:* ciscovoiceguru

*Skype:* ciscovoiceguru

*Twitter:* ciscovoiceguru

*1st Lab Attempt: *Aug 16, 2010


On 3/28/2010 12:17 PM, James Key wrote:
Mark is correct here. The command is needed when sourcing MOH from flash on am mgcp gateway. As soon as call is placed on hold, mgcp traffic stops traversing the wan and the call will drop at 30 seconds. When multicasting across the WAN as you are doing, no issues. Was able to reproduce this in the lab during my studies.
James Key
------------------------------------------------------------------------
*From:* ccie_voice-boun...@onlinestudylist.com [ccie_voice-boun...@onlinestudylist.com] On Behalf Of Matthew Berry [ciscovoiceg...@gmail.com]
*Sent:* Sunday, March 28, 2010 11:13 AM
*To:* OSL
*Subject:* [OSL | CCIE_Voice] Discrepancy between Mark Snow's VoD and Lab Results?

The following is an excerpt from Mark Snow's V3 VoD released late last year.

· *If on an MGCP gateway: “no mgcp timer receive-rtcp” *– If you have an MGCP gateway at a remote site and the requirement is to have a no-WAN MoH solution, you must enter this command.

o You will be sourcing the MoH locally on a SCCP “server” (SRST gateway) and no MGCP traffic will be traversing the WAN.

o Otherwise, you will be on hold for exactly 30 seconds. When testing, stay on hold for at least 1 minute.


I just went through Vol 1 Lab 7 Question 7.2, where you setup MMOH over the WAN to BR1. I did some testing and verified that this command was not needed to maintain a connection between the PSTN phone and BR1 Phone 2.

Has anyone else seen this?

--

Matthew Berry

/A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Written/

*Gmail:* ciscovoiceguru

*Skype:* ciscovoiceguru

*Twitter:* ciscovoiceguru

*1st Lab Attempt: *Aug 16, 2010

NOTICE: This electronic mail message and any files transmitted with it are 
intended
exclusively for the individual or entity to which it is addressed. The message,
together with any attachment, may contain confidential and/or privileged 
information.
Any unauthorized review, use, printing, saving, copying, disclosure or 
distribution
is strictly prohibited. If you have received this message in error, please
immediately advise the sender by reply email and delete all copies.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to