James -
I just verified this scenario in the supplementary services lab the
other day. When I would form a hardware-based conference between HQ
Phone 2, BR1 Phone 2, and PSTN phone, the call would drop after 40
seconds. After adding "no mgcp timer receive-rtcp" my problem was
resolved.
Matthew Berry
/A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Written/
*Gmail:* ciscovoiceguru
*Skype:* ciscovoiceguru
*Twitter:* ciscovoiceguru
*1st Lab Attempt: *Aug 16, 2010
On 3/28/2010 12:17 PM, James Key wrote:
Mark is correct here. The command is needed when sourcing MOH from
flash on am mgcp gateway. As soon as call is placed on hold, mgcp
traffic stops traversing the wan and the call will drop at 30
seconds. When multicasting across the WAN as you are doing, no
issues. Was able to reproduce this in the lab during my studies.
James Key
------------------------------------------------------------------------
*From:* ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of Matthew Berry
[ciscovoiceg...@gmail.com]
*Sent:* Sunday, March 28, 2010 11:13 AM
*To:* OSL
*Subject:* [OSL | CCIE_Voice] Discrepancy between Mark Snow's VoD and
Lab Results?
The following is an excerpt from Mark Snow's V3 VoD released late last
year.
· *If on an MGCP gateway: “no mgcp timer receive-rtcp” *– If you have
an MGCP gateway at a remote site and the requirement is to have a
no-WAN MoH solution, you must enter this command.
o You will be sourcing the MoH locally on a SCCP “server” (SRST
gateway) and no MGCP traffic will be traversing the WAN.
o Otherwise, you will be on hold for exactly 30 seconds. When testing,
stay on hold for at least 1 minute.
I just went through Vol 1 Lab 7 Question 7.2, where you setup MMOH
over the WAN to BR1. I did some testing and verified that this
command was not needed to maintain a connection between the PSTN phone
and BR1 Phone 2.
Has anyone else seen this?
--
Matthew Berry
/A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Written/
*Gmail:* ciscovoiceguru
*Skype:* ciscovoiceguru
*Twitter:* ciscovoiceguru
*1st Lab Attempt: *Aug 16, 2010
NOTICE: This electronic mail message and any files transmitted with it are
intended
exclusively for the individual or entity to which it is addressed. The message,
together with any attachment, may contain confidential and/or privileged
information.
Any unauthorized review, use, printing, saving, copying, disclosure or
distribution
is strictly prohibited. If you have received this message in error, please
immediately advise the sender by reply email and delete all copies.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com