Thx for your kind clarification, now if I have to also enable PQ will I have to enable "priority-queue out" on the interface but in that case Q1 will still be the PQ or there will be one more Q assigned but I think the port only has 4 egress Qs ?
2010/4/29 Angel Perez <gorr...@hotmail.com> > Hi, when you set "1" in share like "share 1 x x x" you are telling the > switch to take the shape value for this queue, 33% in the previous example > > ------------------------------ > Date: Thu, 29 Apr 2010 00:08:24 -0700 > > Subject: Re: [OSL | CCIE_Voice] QoS on switch > From: vccie2...@gmail.com > To: rhender...@gmail.com > CC: gorr...@hotmail.com; ccie_voice@onlinestudylist.com > > > Appreciate your reply on this... have some doubt ... > > ******you have assigned shape 3 for Q1 and Share 1 for Q1 - so in this > case why we need to have 1 on share ? > > CAT2970(config-if-range)# srr-queue bandwidth shape 3 0 0 0 ! Q1 > is limited to 1/3 of the total available BW > CAT2970(config-if-range)# srr-queue bandwidth share 1 70 25 5 ! Q2 > gets 70% of remaining BW; Q3 gets 25% and Q4 gets 5 > > > *********Also the second statement shd be "share 1 70 25 0" instead of > share "1 70 25 1" right pls ?? > > On Wed, Apr 28, 2010 at 11:54 PM, Roger Henderson <rhender...@gmail.com>wrote: > > Oops, Angel is right - I didn't notice your share command there (which > replaces the 32.3, 32.3, 32.3) with appropriate ratios. > > Roger > > 2010/4/29 Angel Perez <gorr...@hotmail.com> > > From QoS Entreprise 3.3 > > Campus QoS Design chapter: > > > > CAT2970(config-if-range)# srr-queue bandwidth shape 3 0 0 0 ! Q1 > is limited to 1/3 of the total available BW > CAT2970(config-if-range)# srr-queue bandwidth share 1 70 25 5 ! Q2 > gets 70% of remaining BW; Q3 gets 25% and Q4 gets 5% > shape 3 0 0 0 = 1/3 0 0 0 = 33% 0 0 0 > share 1 70 25 0 = 1 take shape 70% 25% 0% from remaining > > hth > > ------------------------------ > Date: Wed, 28 Apr 2010 23:43:34 -0700 > From: vccie2...@gmail.com > To: ccie_voice@onlinestudylist.com > Subject: Re: [OSL | CCIE_Voice] QoS on switch > > > little correction .pls... > > > If I want Q1 to get 33 % BW, Q2 20%, Q3 48% and Q4 7% > > srr-queue bandwidth share 25 20 48 7 > srr-queue bandwidth shaped 33 0 0 0 > > > > > On Wed, Apr 28, 2010 at 11:41 PM, vccie2010 <vccie2...@gmail.com> wrote: > > If I want Q1 to get 25 % BW, Q2 20%, Q3 40% and Q4 40% > > srr-queue bandwidth share 25 20 48 7 > srr-queue bandwidth shaped 33 0 0 0 > > As Shape takes precedence over Shared and if we set Shape to 0 for that > value, Share BW will be applied. Not sure if the above solution work ? > > > > > > ------------------------------ > Hotmail: Powerful Free email with security by Microsoft. Get it > now.<https://signup.live.com/signup.aspx?id=60969> > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > > > ------------------------------ > Hotmail: Powerful Free email with security by Microsoft. Get it > now.<https://signup.live.com/signup.aspx?id=60969> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
