I tried this just now. and it is not working, So what i was thinking is correct, it can match only one route pattern and call cannot come back.
Is there any other way anyone would think of?????? On Sun, Jun 20, 2010 at 12:00 AM, Angel Perez <gorr...@hotmail.com> wrote: > Hi Ash, I think that to change calling number at phone display you may do > transformation at rp level, correct me if i'm wrong > > thx > > ------------------------------ > Date: Sat, 19 Jun 2010 12:34:08 +0100 > From: siddas...@gmail.com > To: gorr...@hotmail.com > CC: voip.ccieci...@gmail.com; ccie_voice@onlinestudylist.com > Subject: Re: [OSL | CCIE_Voice] Connected number display > > > Sorry Ignore my last post, I thought you are asking about Calling party > number (ANI). > The one Angel mentioned is a possible solution or try this one...make one > route pattern, Create two RG in the RL, then place mask under Called party > like XXXXXXX and XXXXXXXXXX under Route list detail level. I have not tested > it so give it a try and let us know how it works. > > Ash> > > Angel Perez wrote: > > Hi: > > The only way I can imagine to make this work is with to different route > patterns, instead with one route pattern and a route list with two options, > something like this: > > rp1: 91[2-9]XX.[2-9]XXXXXX DDI PREDOT, PT=br1-local-first-option > rp2: 91.[2-9]XX[2-9]XXXXXX DDI PREDOT, PT=br1-local-sec-option > > br1 phone 1: css (phones,911,br1-local-first-option, br1-local-sec-option, > ld, ...) > > Becouse rp1 and rp2 are and equal match for UCM call processing engine, the > pt orther will be the tie breaker, so the first choice would be rp1, and > second choice would be rp2. > > Let us know how it goes > > Regards > ------------------------------ > Date: Sat, 19 Jun 2010 16:01:09 +0530 > From: voip.ccieci...@gmail.com > To: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] Connected number display > > Hi Experts, > > If I have two MGCP gateways BR1 and BR2, and call should go thru BR1 and if > it fails it should go thru BR2. > Requirement is if call goes through BR1, called number on my display should > be 7 digits. If it goes thru BR2, called number should be 10 digits. > > From what i understand, display number is the manipulated number in Route > Pattern. So I am not really sure how to change the display number on the > basis of what gateway call is going out. > Any Suggestions????? > > ------------------------------ > Hotmail: Trusted email with powerful SPAM protection. Sign up > now.<https://signup.live.com/signup.aspx?id=60969> > > ------------------------------ > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > > ------------------------------ > Hotmail: Trusted email with Microsoft’s powerful SPAM protection. Sign up > now. <https://signup.live.com/signup.aspx?id=60969> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
