You shouldn't change the fragment size. Reason being that you want the fragment to be of a size that would give you a 10ms transmit delay in the event of congestion.
Brgds, Roger Källberg CCIE #26199 (Voice) Consultant Cygate AB Eric Perssons väg 21, SE-217 62 MALMÖ Direkt: +46108787498 Växel: +46108787400 [email protected]<mailto:[email protected]> ________________________________ Från: Bo Gao [[email protected]] Skickat: den 29 juni 2010 16:17 Till: OSL Ämne: [OSL | CCIE_Voice] Frame-relay fragment question HQ-BR1 bandwidth is 384K, I have the following config: map-class frame-relay AutoQoS-FR-Se0/0-201 frame-relay cir 384000 frame-relay bc 3840 frame-relay be 0 frame-relay mincir 384000 frame-relay fragment 480 service-policy output AutoQoS-Policy-Trust If I were to change the cir to 95% based on the QoS SNRD Then I would have: map-class frame-relay AutoQoS-FR-Se0/0-201 frame-relay cir 364800 frame-relay bc 3648 frame-relay be 0 frame-relay mincir 34800 frame-relay fragment 480 service-policy output AutoQoS-Policy-Trust Question: Should I also change the frame-realy fragment from 480 to 456? Why? Thank you! Bo
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
