Yes, that is correct. Roger Källberg CCIE #26199 (Voice) Consultant Cygate AB Eric Perssons väg 21, SE-217 62 MALMÖ
Direkt: +46108787498 Växel: +46108787400 [email protected]<mailto:[email protected]> ________________________________ Från: Berry, Matthew J. [[email protected]] Skickat: den 29 juni 2010 16:39 Till: Roger Källberg; Bo Gao; OSL Ämne: RE: [OSL | CCIE_Voice] Frame-relay fragment question I guess that makes sense. You’re not actually making the link slower, so the fragment size wouldn’t change. We’d only need to change the minCIR, CIR, and bc? Matthew Berry, CCVP, Sr. Unified Communications Engineer [email protected]<mailto:[email protected]> From: [email protected] [mailto:[email protected]] On Behalf Of Roger Källberg Sent: Tuesday, June 29, 2010 9:33 AM To: Bo Gao; OSL Subject: Re: [OSL | CCIE_Voice] Frame-relay fragment question You shouldn't change the fragment size. Reason being that you want the fragment to be of a size that would give you a 10ms transmit delay in the event of congestion. Brgds, Roger Källberg CCIE #26199 (Voice) Consultant Cygate AB Eric Perssons väg 21, SE-217 62 MALMÖ Direkt: +46108787498 Växel: +46108787400 [email protected]<mailto:[email protected]> ________________________________ Från: Bo Gao [[email protected]] Skickat: den 29 juni 2010 16:17 Till: OSL Ämne: [OSL | CCIE_Voice] Frame-relay fragment question HQ-BR1 bandwidth is 384K, I have the following config: map-class frame-relay AutoQoS-FR-Se0/0-201 frame-relay cir 384000 frame-relay bc 3840 frame-relay be 0 frame-relay mincir 384000 frame-relay fragment 480 service-policy output AutoQoS-Policy-Trust If I were to change the cir to 95% based on the QoS SNRD Then I would have: map-class frame-relay AutoQoS-FR-Se0/0-201 frame-relay cir 364800 frame-relay bc 3648 frame-relay be 0 frame-relay mincir 34800 frame-relay fragment 480 service-policy output AutoQoS-Policy-Trust Question: Should I also change the frame-realy fragment from 480 to 456? Why? Thank you! Bo
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
