Hi Erwan, Do you have any voice translation-profile applied to the voice-port? If you have, remove it and try.
On 29 July 2010 12:39, Erwan Erwan <e_er...@yahoo.com> wrote: > Hi Experts, > > I am trying to configure so that *calling phone* will show 7 digit "*To > 8884343* " in SRST and Normal mode. > > I use dial-peer 7 pots in normal mode (send 8884343 from Route Pattern to > BR-1 GW) > > RP Local : 9.[2-9]xxxxxx , predot , send to BR-1 (H323) , hit dial-peer > 7 pots > > And it did show 7 digit "8884343" in my Calling phone > > > BR-1 dialpeer > ---------------------- > dial-peer voice 7 pots > destination-pattern [2-9]......$ > port 0/0/0:23 > forward-digits all > > However when I dial 98884343 in SRST mode,I expect it will use dial-peer 9 > pots > (because I have to dial 9 for local call) > > dial-peer voice 9 pots > destination-pattern 9[2-9]......$ > port 0/0/0:23 > forward-digits 7 > But the call from phone always hit dial-peer 7. And if I shut down dial > peer 7, local call will work fine in SRST. > > But why it hit dial-peer 7 in SRST for 98884343 , which I think dial-peer > 9 is more precise match ?? > > > > And if I tested using "csim start 98884343" in SRST , it will hit > dial-peer 9 (which is right for this case). But if from IP phone it will use > dial-peer 7 when I dial 98884343 in SRST mode. > > Anybody know why and shade light on this ? > > Thks > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com