Thanks for clarifying.
I always put separate types into their own MRGs, and normally limit only one resource to a MRG. It is good to know how I would want to order resources if only in one MRG. Jeff From: groganhockey [mailto:groganhoc...@gmail.com] Sent: Wednesday, October 06, 2010 8:11 AM To: CCIE Voice GMAIL Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Order for arranging resources in MRGL Sorry, let me try to explain with an example: You have an MRGL with SW CFB (on UCM), MOH, SW MTP (on Router), and XCODE resources available. If UCM needs to create a conference, it will select the SW CFB. Ordering does not matter, because there aren't any other CFB resources listed. However, if UCM needs to allocate an MTP, keep in mind that XCODE resources can be used as MTP, so the ordering of the MRG within the MRGL matters for these two resources. Typically, you'd want to choose the SW MTP over the XCODER (HW MTP), due to "cost", so you would want to list the MRG with the SW MTP above the MRG with the XCODER. The SW CFB and MOH could be in either MRG, or in a completely separate MRG. UCM can use all of the resources within an MRG at the same time for various purposes, however similar resources within a single MRG will be round-robin load balanced. One or two of the IPExpert labs touches on this in reference to MOH resources. mike On Tue, Oct 5, 2010 at 9:32 PM, CCIE Voice GMAIL <givemeccievoice2...@gmail.com> wrote: Can you please elaborate on this statement "if you only have a single CFB, MOH, and MTP, you can list them in the same MRG because UCM won't can't use a CFB if you need to insert an MTP." Are you saying that when in a MRG, having both a CFB and an MTP would result in only one resource being usable at a time? Or are you saying that having a CFB and MTP in the same MRGL will result in one resource being usable at a time? I'm just confused at the wording. Thanks for your help, Jeff From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of groganhockey Sent: Tuesday, October 05, 2010 7:14 PM To: Pithog Oil Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Order for arranging resources in MRGL Keep in mind these guidelines when configuring MRGL: Resources are searched in the order listed in the MRGL, so if you insert three MRGs into the MRGL, UCM will search the first MRG for an appropriate resource, then search the second MRG, then search the third. Resources within an MRG are selected in a round-robin fashion. Ordering within the MRGL is only applicable to like-type of resources, so if you only have a single CFB, MOH, and MTP, you can list them in the same MRG because UCM won't can't use a CFB if you need to insert an MTP. mike On Tue, Oct 5, 2010 at 1:51 PM, Pithog Oil <pithog...@yahoo.com> wrote: Hi experts I know there is an Order for arranging arranging resources in the MRGL in a scenario where i have multiple resoucres in a site , but i need to figure out where Conference bridge fits in , in the order. Please correct me if wrong MOH first Transcoder second MTP third Also i while like to know if its possible to have a resources Glut. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com