I am assuming you see the PVDM in sh diag. A conference bridge uses 240 MIPS ie a single PVDM-16. In the config you need to use
voice-card 0 no dspfarm dsp serviced dspfarm Also make sure none of the dsp's are being used ie in a pri or else you would not see any resources if you have a single pvdm-16. HTH Prashant On Sun, Oct 17, 2010 at 8:44 AM, Tamer Ismail <tih...@gmail.com> wrote: > Hello, > Knowing that installing any voice card on router, consuming the DSPs. > Try to plug out the Te card and try again (just to be sure). > > Tamer, > > -----Original Message----- > From: ccie_voice-boun...@onlinestudylist.com > [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Mohammad > Dewan > Sent: Sunday, October 17, 2010 1:50 PM > To: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] maximum sessions 0 > > hi, > this is my first mail to the group > > i have a problem with conference bridge my H/w is cisco2811 12.4.22.T > with a PVDM2-16 > > nothing configured yet and i got this > > Router(config-dspfarm-profile)#maximum sessions ? > <0-0> Number of sessions assigned to this profile > > my config is: > Router(config-dspfarm-profile)#do sh run > > hostname Router > ! > boot-start-marker > boot system flash:c2800nm-adventerprisek9_ivs_li-mz.124-22.T.bin > > memory-size iomem 5 > no network-clock-participate wic 3 > ! > ip cef > ! > ! > no ip domain lookup > ! > voice-card 0 > dsp services dspfarm > ! > ! > ! > ! > ! > controller T1 0/3/0 > ! > controller T1 0/3/1 > ! > ! > ! > ! > ! > interface FastEthernet0/0 > ip address 192.168.1.10 255.255.255.0 > duplex auto > speed auto > ! > interface FastEthernet0/1 > no ip address > shutdown > duplex auto > speed auto > ! > interface Serial0/0/0 > no ip address > shutdown > clock rate 2000000 > ! > ! > ! > ! > voice-port 0/2/0 > ! > voice-port 0/2/1 > ! > ccm-manager fax protocol cisco > ! > mgcp fax t38 ecm > mgcp behavior g729-variants static-pt > ! > sccp local FastEthernet0/0 > sccp ccm 192.168.1.20 identifier 1 priority 1 version 7.0 > sccp > ! > sccp ccm group 1 > associate ccm 1 priority 1 > associate profile 1 register GW_CFB > ! > dspfarm profile 1 conference > codec g711ulaw > codec g711alaw > codec g729ar8 > codec g729abr8 > codec g729r8 > codec g729br8 > shutdown > ! > ! > ! > ! > ! > gatekeeper > shutdown > ! > ! > line con 0 > line aux 0 > line vty 0 4 > login > ! > scheduler allocate 20000 1000 > end > > can anyone tell me what is happening with my router > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com