Hi Miron, Yes I have the "compression header ip rtp" on the rtp class-maps on both.
Do you think it has anything to do with "trust" and not having a bad configuration on the switch. Thanks, DA On 11/1/10, Miron Kobelski <findko...@gmail.com> wrote: > hi, check if you have crtp enabled on the remote side. > > regards > > -- > Sent from my mobile device. > > On 1 Nov 2010 01:44, "David A" <david.a...@gmail.com> wrote: > > Hi All, > > I am configuring autoqos as below between HQ and BR1 - 1536k link. > After applying the config on HQ I do not receive any audio on the > phone from any WAN device ie HQ and BR2. > > Here is my config > > HQ > > class-map match-any AutoQoS-VoIP-RTP-Trust > match ip dscp ef > class-map match-any AutoQoS-VoIP-Control-Trust > match ip dscp cs3 > match ip dscp af31 > ! > > > policy-map AutoQoS-Policy-Trust-siteb > class AutoQoS-VoIP-RTP-Trust > priority percent 33 > compress header ip rtp > class AutoQoS-VoIP-Control-Trust > bandwidth percent 5 > class class-default > fair-queue > > interface Serial0/0/0.1 point-to-point > bandwidth 1536 > ip address 10.10.111.1 255.255.255.0 > snmp trap link-status > frame-relay interface-dlci 201 > class AutoQoS-FR-Se0/0/0-201 > auto qos voip trust > > map-class frame-relay AutoQoS-FR-Se0/0/0-201 > frame-relay cir 1459200 > frame-relay bc 14592 > frame-relay be 0 > frame-relay mincir 1459200 > service-policy output AutoQoS-Policy-Trust-siteb > > > > Same config is on BR1 > > What am I doing wrong. > > Thanks, > DA > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com