Make sure you do not have called transformation applied on the dev pool or the phone. This could be localizing your display back to 7 digits.
-- On Nov 11, 2010, at 0:55, Mujaddid Ahmed <mujaddi...@yahoo.com> wrote: > Hi, > > Please confirm what can be the reason of globalization not working with cisco > 7965 phones. > I globalized it on CUCM gateway configuration by adding appropriate prefix on > type of calls. > > did, no mgcp / mgcp on gateway and reset the gateway from cucm as well. > > call lands on phone and still shows only 7 digit calling number in both > ringing and missed call. > > nothing has been set so far in Device pool or on device to effect the > globalization done on Gateway. > > Is there any serivce parameter or any command on router that can prevent the > globalize display on phone? > > Please help, as i wasted lot of time in troubleshooting this particular issue > in a very time critical environment. > > Regards, > Iftikhar Ahmed > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com