Hello, I was wondering if someone can suggest what may be the problem with my CME SIP phone or CUE setup. The SCCP can access the CUE mailbox just fine. MWI also works. (Outcall + SIP Notify for the SIP phone.) But when I call CUE from the CME SIP Phone, CUE does not recognize any DTMF signals. I do see CCSIP NOTIFY messages when I press a key...
I already did several create profile, reset, even restarted the router and CUE module. I think my config is right... But I may be missing something really stupid... Here are some configs and debugs for reference... <I pressed "1" on the SIP phone that resulted in below> BR2-RTR# Nov 21 04:43:54.203: //-1/xxxxxxxxxxxx/SIP/Msg/sipDisplayBinaryData: Sending: Binary Message Body Nov 21 04:43:54.203: Content-Type: audio/telephone-event 00 00 07 D0 Nov 21 04:43:54.207: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg: Sent: NOTIFY sip:3...@10.10.202.2:5060 SIP/2.0 Via: SIP/2.0/UDP 10.10.202.1:5060;branch=z9hG4bK90189F From: "br2 phn 4" <sip:3...@10.10.202.1 <sip%3a3...@10.10.202.1> >;tag=238694-1F To: <sip:3...@10.10.202.2 <sip%3a3...@10.10.202.2>>;tag=cued2c62451 Call-ID: c2ca34c0-f46011df-810da94a-d18d3...@10.10.202.1 CSeq: 102 NOTIFY Max-Forwards: 70 Date: Sun, 21 Nov 2010 04:43:54 GMT User-Agent: Cisco-SIPGateway/IOS-12.x Event: telephone-event Subscription-State: active Contact: <sip:10.10.202.1:5060> Content-Type: audio/telephone-event Content-Length: 4 .P Nov 21 04:43:54.219: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg: Received: BR2-RTR#SIP/2.0 200 Ok Via: SIP/2.0/UDP 10.10.202.1:5060;branch=z9hG4bK90189F To: <sip:3...@10.10.202.2 <sip%3a3...@10.10.202.2>>;tag=cued2c62451 From: "br2 phn 4" <sip:3...@10.10.202.1 <sip%3a3...@10.10.202.1> >;tag=238694-1F Call-ID: c2ca34c0-f46011df-810da94a-d18d3...@10.10.202.1 CSeq: 102 NOTIFY Content-Length: 0 Allow-Events: refer Allow-Events: telephone-event Allow-Events: message-summary BR2-RTR#sh run | be voice serv voice service voip allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip sip bind control source-interface Vlan400 bind media source-interface Vlan400 registrar server ! ! ! BR2-RTR# BR2-RTR#sh run | be dial-p dial-peer voice 3600 voip destination-pattern 3600 session protocol sipv2 session target ipv4:10.10.202.2 incoming called-number 399[89].... dtmf-relay sip-notify codec g711ulaw no vad ! BR2-RTR#sh run | be voice register voice register global mode cme source-address 10.10.202.1 port 5060 max-dn 2 max-pool 2 authenticate register timezone 13 time-format 24 date-format D/M/Y voicemail 3600 tftp-path flash: create profile sync 0000712964732422 ntp-server 10.10.100.2 mode unicast ! ! voice register dn 2 number 3006 call-forward b2bua busy 3600 call-forward b2bua noan 3600 timeout 12 name br2 phn 4 mwi voice register pool 2 id mac 0017.95D0.231B type 7961 number 1 dn 2 dialplan 1 dtmf-relay rtp-nte sip-notify username 3006 password cisco description 32143006 codec g711ulaw ! Thanks, -Dave
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
