Hi Miron, Thanks for your suggestion, but no joy... Even changed phones, but it still didn't work...
voice register pool 2 id mac 001A.2F75.2336 type 7961 number 1 dn 2 dialplan 1 dtmf-relay rtp-nte sip-notify username 3006 password cisco description 32143006 codec g711ulaw ! dial-peer voice 3600 voip destination-pattern 3600 session protocol sipv2 session target ipv4:10.10.202.2 incoming called-number 399[89].... dtmf-relay sip-notify rtp-nte codec g711ulaw no vad ! I never heard that you had to add the rtp-nte to the SIP dial-peer to CUE, since CUE only uses sip-notify... Thanks, -Dave On Sat, Nov 20, 2010 at 7:43 PM, Miron Kobelski <findko...@gmail.com> wrote: > Hi, > > configure dial-peer to cue and voice register pools with "dtmf-relay > sip-notify rtp-nte", create profile & restart phones. Should work fine. > > regards > kobel > > On Sun, Nov 21, 2010 at 00:50, David Lee <d16...@gmail.com> wrote: > >> Hello, >> >> I was wondering if someone can suggest what may be the problem with my CME >> SIP phone or CUE setup. The SCCP can access the CUE mailbox just fine. MWI >> also works. (Outcall + SIP Notify for the SIP phone.) But when I call CUE >> from the CME SIP Phone, CUE does not recognize any DTMF signals. I do see >> CCSIP NOTIFY messages when I press a key... >> >> I already did several create profile, reset, even restarted the router and >> CUE module. I think my config is right... But I may be missing something >> really stupid... >> >> >> Here are some configs and debugs for reference... >> >> <I pressed "1" on the SIP phone that resulted in below> >> BR2-RTR# >> Nov 21 04:43:54.203: //-1/xxxxxxxxxxxx/SIP/Msg/sipDisplayBinaryData: >> Sending: Binary Message Body >> Nov 21 04:43:54.203: Content-Type: audio/telephone-event >> 00 00 07 D0 >> Nov 21 04:43:54.207: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg: >> Sent: >> NOTIFY sip:3...@10.10.202.2:5060 SIP/2.0 >> Via: SIP/2.0/UDP 10.10.202.1:5060;branch=z9hG4bK90189F >> From: "br2 phn 4" <sip:3...@10.10.202.1 <sip%3a3...@10.10.202.1> >> >;tag=238694-1F >> To: <sip:3...@10.10.202.2 <sip%3a3...@10.10.202.2>>;tag=cued2c62451 >> Call-ID: c2ca34c0-f46011df-810da94a-d18d3...@10.10.202.1 >> CSeq: 102 NOTIFY >> Max-Forwards: 70 >> Date: Sun, 21 Nov 2010 04:43:54 GMT >> User-Agent: Cisco-SIPGateway/IOS-12.x >> Event: telephone-event >> Subscription-State: active >> Contact: <sip:10.10.202.1:5060> >> Content-Type: audio/telephone-event >> Content-Length: 4 >> >> .P >> Nov 21 04:43:54.219: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg: >> Received: >> >> BR2-RTR#SIP/2.0 200 Ok >> Via: SIP/2.0/UDP 10.10.202.1:5060;branch=z9hG4bK90189F >> To: <sip:3...@10.10.202.2 <sip%3a3...@10.10.202.2>>;tag=cued2c62451 >> From: "br2 phn 4" <sip:3...@10.10.202.1 <sip%3a3...@10.10.202.1> >> >;tag=238694-1F >> Call-ID: c2ca34c0-f46011df-810da94a-d18d3...@10.10.202.1 >> CSeq: 102 NOTIFY >> Content-Length: 0 >> Allow-Events: refer >> Allow-Events: telephone-event >> Allow-Events: message-summary >> >> >> >> BR2-RTR#sh run | be voice serv >> voice service voip >> allow-connections h323 to h323 >> allow-connections h323 to sip >> allow-connections sip to h323 >> allow-connections sip to sip >> sip >> bind control source-interface Vlan400 >> bind media source-interface Vlan400 >> registrar server >> ! >> ! >> ! >> >> >> BR2-RTR# >> BR2-RTR#sh run | be dial-p >> dial-peer voice 3600 voip >> destination-pattern 3600 >> session protocol sipv2 >> session target ipv4:10.10.202.2 >> incoming called-number 399[89].... >> dtmf-relay sip-notify >> codec g711ulaw >> no vad >> ! >> >> BR2-RTR#sh run | be voice register >> voice register global >> mode cme >> source-address 10.10.202.1 port 5060 >> max-dn 2 >> max-pool 2 >> authenticate register >> timezone 13 >> time-format 24 >> date-format D/M/Y >> voicemail 3600 >> tftp-path flash: >> create profile sync 0000712964732422 >> ntp-server 10.10.100.2 mode unicast >> ! >> ! >> voice register dn 2 >> number 3006 >> call-forward b2bua busy 3600 >> call-forward b2bua noan 3600 timeout 12 >> name br2 phn 4 >> mwi >> >> voice register pool 2 >> id mac 0017.95D0.231B >> type 7961 >> number 1 dn 2 >> dialplan 1 >> dtmf-relay rtp-nte sip-notify >> username 3006 password cisco >> description 32143006 >> codec g711ulaw >> ! >> >> >> >> Thanks, >> >> -Dave >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
