Mark, I am interested! Can I get first dibs? What do you have?
Matthew Berry ** Sent from my iPhone. Excuse brevity and typographical errors. ** On Feb 10, 2011, at 1:31 PM, Mark Holloway <m...@markholloway.com> wrote: > I have a few pieces of gear that I'm willing to part with if anyone is > interested. Primarily 2811's and 2821 fully equipped, which works great with > the IPX labs. It's best to take this discussion off the list, but I'd much > rather see my equipment find a home with someone who is working towards the > CCIE rather than list it on ebay. > > On Feb 4, 2011, at 7:07 PM, Ashwani Ranpise wrote: > >> ccied1ot, >> >> How much do you want for 2811 with AIM-CUE and NM-HD2ve ? I am in North >> Carolina. >> >> Thanks, >> Ashwani >> From: ccie_voice-boun...@onlinestudylist.com on behalf of ccieid1ot >> Sent: Fri 2/4/2011 3:54 PM >> To: khaled Saholy >> Cc: ccie_voice@onlinestudylist.com >> Subject: Re: [OSL | CCIE_Voice] Need assistance in setting up a Home Lab >> >> I still have some pieces left. I'm willing to let it go for cheap. Let me >> know. Oh and thanks. Was a long journey and I probably wouldn't have done >> it again. >> >> duy >> ccie #27737 voice >> >> tmobile g2 >> >> On Feb 4, 2011 1:48 PM, "khaled Saholy" <khaled_sah...@hotmail.com> wrote: >> > >> > >> > Thanks cciedot for the information and congratulation for your ccie. >> > >> > I'll check the price of your lab setup and see my budget. >> > >> > Note: The email before the last one was not sent by me , it's duplicated. >> > >> > Regards. >> > >> > Khaled >> > >> > >> > >> > Date: Fri, 4 Feb 2011 13:22:31 -0600 >> > Subject: Re: RE: [OSL | CCIE_Voice] Need assistance in setting up a Home >> > Lab >> > From: ccieid...@gmail.com >> > To: khaled_sah...@hotmail.com >> > CC: ccie_voice@onlinestudylist.com >> > >> > >> > The nm-hd-2ve has 30 channels onboard so no pvdm2 is needed. I used the >> > 2811 because it supports cme 7.x. that is needed as the other routers >> > doesn't support it. >> > duy >> > ccie #27737 voice >> > tmobile g2 >> > On Feb 4, 2011 1:07 PM, "khaled Saholy" <khaled_sah...@hotmail.com> wrote: >> >> >> >> >> >> It seems both modules are the same but NM-HD-2VE with predefined no of >> >> DSP and with NM-HDV2 , expansion is supported. >> >> >> >> For Site C , why you chose 2811 and not like 2621xm or 3745 as they are >> >> cheaper? >> >> >> >> Anyhow, are all features that should be tested in lab V3 are there in >> >> your lab, I mean didn't you face any kind of limitation during your >> >> practic for the lab? >> >> >> >> Khaled >> >> >> >> >> >> >> >> Date: Fri, 4 Feb 2011 12:29:23 -0600 >> >> Subject: Re: [OSL | CCIE_Voice] Need assistance in setting up a Home Lab >> >> From: ccieid...@gmail.com >> >> To: khaled_sah...@hotmail.com >> >> CC: ccie_voice@onlinestudylist.com >> >> >> >> So does the NM-HD-2VE. It supports the new way of configuring transcoders >> >> and conf-b. >> >> >> >> Here was my setup. >> >> >> >> HQ >> >> 2610XM >> >> NM-HDV-24 >> >> VWic-1MFT-T1 >> >> WIC-1T >> >> >> >> SB >> >> 1760 >> >> PVDM-4 >> >> VWIC-1MFT-T1 >> >> WIC-1T >> >> >> >> SC >> >> 2811 >> >> AIM-CUE >> >> VWIC-1MFT-E1 >> >> WIC-1T >> >> NM-HD-2VE >> >> >> >> >> >> PSTN/WAN >> >> 3640 >> >> NM-HD-2VE >> >> VWIC-2MFT-T1 >> >> VWIC-1MFT-T1 >> >> NM-4T >> >> >> >> >> >> >> >> >> >> 2011/2/4 khaled Saholy <khaled_sah...@hotmail.com> >> >> >> >> >> >> Hi >> >> >> >> I chose NM-HDV2 because it supports PVDM2 , see this note from Cisco site: >> >> >> >> " PVDM and PVDM2 modules are not interchangeable. Use PVDM modules with >> >> the NM-HDV network module only, and use PVDM2 modules with the NM-HDV2 >> >> network module only. " >> >> >> >> http://www.cisco.com/en/US/docs/routers/access/interfaces/nm/hardware/installation/guide/Conntvoi.html >> >> >> >> >> >> It seems you already got IE number in voice , what's the hardware you >> >> used for lab? >> >> >> >> Regards. >> >> >> >> Khaled >> >> >> >> >> >> >> >> >> >> Date: Fri, 4 Feb 2011 10:38:46 -0600 >> >> Subject: Re: [OSL | CCIE_Voice] Need assistance in setting up a Home Lab >> >> From: ccieid...@gmail.com >> >> To: khaled_sah...@hotmail.com >> >> CC: ccie_voice@onlinestudylist.com >> >> >> >> >> >> >> >> >> >> I have some vwics wic-1t aim-cue and 3550 switch, also a nm-hd-2ve. does >> >> the same as nm-hdv2. But has 2 slots. >> >> duy >> >> ccie #27737 voice >> >> tmobile g2 >> >> >> >> On Feb 4, 2011 8:54 AM, "khaled Saholy" <khaled_sah...@hotmail.com> wrote: >> >>> >> >>> >> >>> Hi friends, >> >>> >> >>> I'm planning to buy home lab for CCIE Voice and I spent some days in >> >>> searching for the right stuff. >> >>> >> >>> So, I'd like to share it here to know if I go straight and order it or I >> >>> missed any part. >> >>> >> >>> About the lab which contain Cisco 2801 or 2811 , I could use them but >> >>> you know because of budget limitation I thought of other models. >> >>> >> >>> I already have a PC with QuadCore CPU and 8 GB of RAM and here is the >> >>> lab components: >> >>> >> >>> PSTN/FrameRelay router: >> >>> 3745 >> >>> 2 x NM-HDV2 >> >>> 1 x VWIC-2MFT-T1 >> >>> 1 x VWIC-1MFT-E1 >> >>> 2 x PVDM2-16 >> >>> 3 x WIC-1T >> >>> >> >>> HQ Router: >> >>> 2621XM >> >>> 1 x NM-HDV2 >> >>> 1 x VWIC-1MFT-T1 >> >>> 1 x WIC-1T >> >>> 2 x PVDM2-16 >> >>> >> >>> Branch1 Router: >> >>> 2621XM >> >>> 1 x NM-HDV2 >> >>> 1 x VWIC-1MFT-T1 >> >>> 1 x WIC-1T >> >>> 1 x PVDM2-16 >> >>> >> >>> Branch2 Router: >> >>> 3745 >> >>> 1 x AIM-CUE >> >>> 1 x NM-HDV2 >> >>> 1 x VWIC-1MFT-E1 >> >>> 1 x WIC-1T >> >>> 1 x PVDM2-16 >> >>> >> >>> 1 x 7960 IP Phone >> >>> 1 x 7940 IP Phone >> >>> 2 x 7961 IP Phone >> >>> 2 x 7941 IP Phone >> >>> >> >>> 1 x WS-C3550-24PWR-SMI >> >>> 4 x CAB-6060-3FT BACK-TO-BACK CABLE FOR WIC-1T TO 1T >> >>> >> >>> Waiting for your feedback. >> >>> >> >>> Thanks and regards. >> >>> >> >>> Khaled Al-Saholy >> >>> >> >>> >> >>> >> >> >> >> >> >> -- >> >> duy >> >> CCIE #27737 Voice >> >> >> >> >> > >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
