I just need to add one note:
I stopped the CUCM service, so the phone registered with SRST router at that
point, if I called from analog phone to IP phone and press hold I can hear MoH
form the flash.
________________________________
From: ccieid1ot <ccieid...@gmail.com>
To: Ccie Voice <v.c...@yahoo.com>
Cc: CCIE Study <ccie_voice@onlinestudylist.com>
Sent: Sat, March 5, 2011 12:17:33 AM
Subject: Re: [OSL | CCIE_Voice] Multicast MoH for Remote branches
Configs? Make sure under multicast route has the loopback and voice vlan int.
duy
ccie #27737 voice
tmobile g2
On Mar 4, 2011 3:14 PM, "Ccie Voice" <v.c...@yahoo.com> wrote:
> Hi All,
>
> I did the following scenario:
>
> HQ and BR1
> I enabled MoH g711ual Multi-cast and I configured multicast under SRST
> configuration.
>
> if BR1-Ph1 called BR1-PH2 and press hold I can heat MoH from the flash of BR1
> Router.
>
>
> The problem is when I am calling form PSTN. I have FXS port if called from my
> analog phone to BR1-Ph1 and pressed hold I just heat "tot tot tot .....".
>
>
> Any Idea?
>
>
>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
