It is some type of codec/mtp issue, i think. If i change the voip dialpeer to include codec g711ulaw on the CME the call can be put on hold, and recover the rtp stream. (I can hear the other side again)
If I remove the codec from the voip dial-peer, the codec is G729r8 all the way though and the phone on the ccm can put the call on hold. But when i press resume I can not hear the other side. I have a MTP assigned to the HQ device pool and also to the GK. I have blown everything away and i have got the same thing again. -----Original Message----- From: Brian Mulgrew [mailto:btmulg...@gmail.com] Sent: Tue 3/15/2011 4:29 AM To: Leslie Meade Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Cme to ccm via gatekeeper Hi Leslie - is h245tcs unchecked on the CUCM gk trunk? hth Brian On Tue, Mar 15, 2011 at 3:49 AM, Leslie Meade <lme...@signal.ca> wrote: > I have gotten cube setup and everything works as planned call goes via the > cube and I have a software mtp for placing calls on hold. > > If I dial 5xxx or 1xxx from the cme I am able to compleat the call via the > gatekeeper but when a ccm phone puts them in hold I get dead air, The cme > gets tone for moh. But I am not able to hear anything when I resume the > call. > > If I place the same ccm call on hold at the cme site and resume it, i am > able to hear the call again. > > Any ideas? > > > Sent from my iPhone > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com