Hi Roger, That's what i'm wondering too,but the fact is that, this is what the question request. The PGuide doesn't given too much of explanation of this.
Anyone who completed this question may provide some hints? Thanks Shingei. On Mon, Apr 11, 2011 at 2:26 PM, Rogers Ochieng <rogersochi...@gmail.com>wrote: > That's why i had wondered what the purpose is. I don't see a way unless you > want to match all PSTN except HQ/BR1 numbers then translate those to go to > VM and let thw HQ/BR1 go through the normal CFB and CFNA > > > On 11 April 2011 09:16, ShinGei Yong <shingei.y...@gmail.com> wrote: > >> Hi Roger, >> >> So what you trying to do is that >> PSTN Caller --> ephone-dn(x3006) --> cfa vm --> outgoing xlation-rule >> >> Why do we need to change redirecting-number? Since its already 3006. >> Also,if perform cfa, what about caller from HQ/BR1? >> As BR2 is under SRST, HQ/BR1 will reach BR2 via PSTN as well, this will >> cause them to be >> directed to vm directly also right? >> >> Thanks >> Shingei >> >> >> >> >> On Mon, Apr 11, 2011 at 1:30 PM, Rogers Ochieng >> <rogersochi...@gmail.com>wrote: >> >>> Off the top of my head am thinking do call forward all and apply outgoing >>> voice translation rule under the ephone-dn to change your redirecting >>> number. >>> >>> On 11 April 2011 07:47, ShinGei Yong <shingei.y...@gmail.com> wrote: >>> >>>> Hi all, >>>> >>>> I'm following up the same question that i posted last month, regarding >>>> the PSTN call diversion >>>> to BR2 CUE Voicemail during SRST.I was got confuse by the question,but >>>> looking at it to question & PGuide, >>>> i think my understanding is correct. >>>> >>>> The question is asking, >>>> Ensure that the caller from PSTN who have dialed BR2 phone can be routed >>>> to Voicemail when >>>> there is a WAN outage at the BR2 site. >>>> >>>> In PGuide, the BR2 DN has CFUR external checked.So my understanding is >>>> that,when PSTN caller >>>> call BR2 phone,it should be routed to voicemail immediately,which CUE is >>>> locally located. >>>> My question is,how do achieve that PSTN caller enter Voicemail >>>> immediately without ringing the BR2 phone but >>>> allowing call from HQ/BR1 ring the destination and enter voicemail when >>>> CFNA or CFB. >>>> >>>> Anyone complete this section successfully?May share the idea? >>>> >>>> >>>> Shingei >>>> >>>> >>>> >>>> On Tue, Mar 8, 2011 at 11:16 PM, Rogers Ochieng < >>>> rogersochi...@gmail.com> wrote: >>>> >>>>> Looking at that question the wording there does not specify that you >>>>> need to send calls immediately to voicemail but that PSTN calls to BR2 can >>>>> be routed to VM, it doesn't say at what state so to send VM so PSTN calls >>>>> to >>>>> BR2 busy and no answer states should meet the requirement. >>>>> >>>>> >>>>> On 8 March 2011 18:05, ShinGei Yong <shingei.y...@gmail.com> wrote: >>>>> >>>>>> Hi Rogers, >>>>>> >>>>>> Yes, and again, as stated below, i'm able to achieved CFB and CFNA >>>>>> during SRST, >>>>>> so in other words,the required dial-peer and setting to route call to >>>>>> CUE is already done,right? >>>>>> And HQ/BR1 phone is able to call BR2 phone via PSTN during SRST. >>>>>> >>>>>> Maybe put the question in this way: >>>>>> >>>>>> PSTN caller which originate from HQ/BR1, ring the destination during >>>>>> SRST.(I've done this) >>>>>> PSTN caller which originate from PSTN, to Voicemail without ringing >>>>>> BR2 phones during SRST >>>>>> >>>>>> Is the second requirement possible? >>>>>> >>>>>> Shingei. >>>>>> >>>>>> >>>>>> >>>>>> On Tue, Mar 8, 2011 at 10:26 PM, Rogers Ochieng < >>>>>> rogersochi...@gmail.com> wrote: >>>>>> >>>>>>> AS you've stated you are using CUE which in normal operations you've >>>>>>> integrated using jtapi CUE integration, i assuem the CUE module is on >>>>>>> the >>>>>>> BR2 router. So for SRST create a voip dial-peer using sip protocol and >>>>>>> codec >>>>>>> g711ulaw, dtmf sip-notify, to route calls to CUE and set CFB and CFNA, >>>>>>> setup >>>>>>> CUE sip settings. For HQ and BR1 to access BR2 setup CFUR >>>>>>> >>>>>>> On 8 March 2011 16:05, ShinGei Yong <shingei.y...@gmail.com> wrote: >>>>>>> >>>>>>>> Hi Roger, >>>>>>>> >>>>>>>> As stated below, i'm able to achieved that PSTN caller routed to VM >>>>>>>> when CFB and CFNA. >>>>>>>> Alsothere's no CUC in this lab. >>>>>>>> >>>>>>>> how to achieve that PSTN caller will be route to VM while allowing >>>>>>>> HQ or BR1 ring the destination in SRST site? >>>>>>>> TIA >>>>>>>> Shingei >>>>>>>> >>>>>>>> 2011/3/8 Roger Källberg <roger.kallb...@cygate.se> >>>>>>>> >>>>>>>> You need to setup CFB & CFNA in an SRST situation, so that it >>>>>>>>> sends the call over PSTN to CUC VM. >>>>>>>>> >>>>>>>>> Sincerely >>>>>>>>> >>>>>>>>> *Roger Källberg* >>>>>>>>> CCIE #26199 (Voice) >>>>>>>>> Consultant >>>>>>>>> Cygate AB >>>>>>>>> Eric Perssons väg 21, SE-217 62 MALMÖ >>>>>>>>> >>>>>>>>> ------------------------------ >>>>>>>>> *Från:* ShinGei Yong [shingei.y...@gmail.com] >>>>>>>>> *Skickat:* den 8 mars 2011 11:00 >>>>>>>>> *Till:* ccie_voice@onlinestudylist.com >>>>>>>>> *Ämne:* [OSL | CCIE_Voice] Vol2 Lab 5 Question 4.2 CUE SRST >>>>>>>>> >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> The question stated,caller from PSTN "CAN BE" routed to VM when >>>>>>>>> there's WAN outage at BR2. >>>>>>>>> Internal caller from HQ or BR1 must be able to reach BR2 phone and >>>>>>>>> forward to VM if no answer. >>>>>>>>> >>>>>>>>> To me,there are two meaning of the sentense >>>>>>>>> >>>>>>>>> 1. PSTN caller routed to VM immediately when there's WAN outage at >>>>>>>>> BR2, >>>>>>>>> >>>>>>>>> 2. PSTN caller routed to VM when CFB or CFNA. >>>>>>>>> >>>>>>>>> What confuse me is that,how to achieve that the PSTN caller routed >>>>>>>>> to VM immediately >>>>>>>>> when there's a WAN outage at BR2?I'm able to achieved that PSTN >>>>>>>>> caller router to VM >>>>>>>>> when CFB and CFNA. >>>>>>>>> >>>>>>>>> In proctor guide, Forward Unregisterd Int and External been >>>>>>>>> checked(VM),but how the UCM instruct PSTN call >>>>>>>>> to VM?The PSTN call will hitting the BR2 GW directly due to SRST. >>>>>>>>> >>>>>>>>> Am i thinking of too much? >>>>>>>>> >>>>>>>>> Shingei >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> For more information regarding industry leading CCIE Lab training, >>>>>>>> please visit www.ipexpert.com >>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>>> _______________________________________________ >>>> For more information regarding industry leading CCIE Lab training, >>>> please visit www.ipexpert.com >>>> >>>> >>> >> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
