Hi Scott, It's the first time I hear about this problem... Which IOS are you running?
Can you post the whole configuration? I'd say could be some bug on a particular platform you're running, but can't be sure. Sent from my iPad On 29 Apr 2011, at 19:51, Scott ODonnell <scott.odonn...@gmail.com> wrote: > Can anyone offer experience with attempting to run a SCCP and SIP > phone on CME at the same time? > I keep running into problems getting the phones registered (one as > SCCP and one as SIP) > > The only way I've been able to get both to register is to issue "no > create profile" under voice register global , with "Create cnf-files" > under Telephony-Service. > > This allows the SCCP phone to find the right files and boot. > > Then I have to reverse the process by issuing "No create cnf-files" > under Telephony-service and "Create Profile" under voice register > global. > > This allows the SIP phone to register. > > It all seems rather ugly. > > The problem gets worse if the phones don't have a base SCCP or SIP > load on them to start with. > Then I have to mess with the tftp-server config to get the right loads > in place for a "factory reset" phone to find the right stuff. > > I'm just imagining the worse scenario in the lab and trying to see if > there are any pieces to this puzzle that I have found yet. > > Thanks for any input > > Scott > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com