Is this a h323 gw ? It is difficult to check whether the GW is registered properly or not call manager. Try checking h323 interface commands and bind address. failed call is clearing in the second higlighed message. what does sh isdn stat shows ?
_____ From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Chevy Sent: Sunday, May 01, 2011 3:31 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] ISDN debug message I'm doing a lab and I'm getting an isdn message that I've never seen before when I try to make an inbound call to my HQ site. Here's the message Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Progress Ind i = 0x8583 - Origination address is non-ISDN Calling Party Number i = 0x4180, '2123942123' Plan:ISDN, Type:Subscriber(local) Called Party Number i = 0xA1, '2123945002' Plan:ISDN, Type:National May 2 02:29:10.576: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8 callref = 0x8092 Channel ID i = 0xA98381 Exclusive, Channel 1 HQ-RTR# May 2 02:29:10.764: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 callref = 0x8092 Cause i = 0x80A6 - Network out of order May 2 02:29:10.776: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref = 0x0092 Cause i = 0x82E4 - Invalid information element contents May 2 02:29:10.780: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x8092
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com