Check your config, ISDN issue signalling, I believe for this issue, if config good, track with
debug cch323 h225 debug ip tcp transactions at the beginning of the failure there should be an iec message that might help, use show voice iec and that number to get more details. On Sun, May 1, 2011 at 5:31 PM, Chevy <chevy.man...@gmail.com> wrote: > I'm doing a lab and I'm getting an isdn message that I've never seen before > when I try to make an inbound call to my HQ site. Here's the message > > > Bearer Capability i = 0x8090A2 > Standard = CCITT > Transfer Capability = Speech > Transfer Mode = Circuit > Transfer Rate = 64 kbit/s > Channel ID i = 0xA98381 > Exclusive, Channel 1 > Progress Ind i = 0x8583 - Origination address is non-ISDN > Calling Party Number i = 0x4180, '2123942123' > Plan:ISDN, Type:Subscriber(local) > Called Party Number i = 0xA1, '2123945002' > Plan:ISDN, Type:National > May 2 02:29:10.576: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8 callref = > 0x8092 > Channel ID i = 0xA98381 > Exclusive, Channel 1 > HQ-RTR# > May 2 02:29:10.764: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 callref > = 0x8092 > Cause i = 0x80A6 - Network out of order > May 2 02:29:10.776: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref = > 0x0092 > Cause i = 0x82E4 - Invalid information element contents > May 2 02:29:10.780: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 > callref = 0x8092 > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
