HI The router is not functional
From: CCIE Voice [mailto:cc...@corb.net] Sent: Monday, May 16, 2011 3:28 PM To: Randall Crumm Cc: <ccie_voice@onlinestudylist.com> Subject: Re: [OSL | CCIE_Voice] MGCP GW will not register in CM -- Unknown Your output indicates that the Gw is registered. Do you mean it is not functional? That could be wrong router or port. -- On May 16, 2011, at 14:22, "Randall Crumm" <randall.cr...@flextronics.com> wrote: HI, Having an issue in Call Manager. My br1 config looks good just can’t get it to register in call manager. Any ideas? I’ve reloaded the router, deleted the GW and recreated it. No mgcp and mgcp. Etc… Here are snipit of the config and CUCM page BR1-RTR(config)#do show ccm MGCP Domain Name: BR1-RTR.proctorlabs.com Priority Status Host ============================================================ Primary Registered 10.10.210.11 First Backup Backup Ready 10.10.210.10 Second Backup None Current active Call Manager: 10.10.210.11 Backhaul/Redundant link port: 2428 Failover Interval: 30 seconds Keepalive Interval: 15 seconds Last keepalive sent: 11:48:05 EST May 14 2011 (elapsed time: 00:00:07) Last MGCP traffic time: 11:48:05 EST May 14 2011 (elapsed time: 00:00:07) Last failover time: 11:11:05 EST May 14 2011 from (10.10.210.11) Last switchback time: 11:11:35 EST May 14 2011 from (10.10.210.10) Switchback mode: Immediate MGCP Fallback mode: Not Selected Last MGCP Fallback start time: None Last MGCP Fallback end time: None MGCP Download Tones: Disabled TFTP retry count to shut Ports: 2 Backhaul Link info: Link Protocol: TCP Remote Port Number: 2428 Remote IP Address: 10.10.210.11 Current Link State: OPEN Statistics: Packets recvd: 3 Recv failures: 2 Packets xmitted: 1 Xmit failures: 0 PRI Ports being backhauled: Slot 0, VIC 0, port 0 FAX mode: cisco Configuration Error History: BR1-RTR(config)# ccm-manager switchback immediate ccm-manager redundant-host 10.10.210.10 ccm-manager mgcp ! mgcp mgcp call-agent 10.10.210.11 service-type mgcp version 0.1 mgcp dtmf-relay voip codec all mode out-of-band mgcp bind control source-interface Loopback0 mgcp bind media source-interface Loopback0 ! interface Serial0/0/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn map address ^[2-9]...... plan isdn type subscriber isdn map address ^1[2-9]* plan isdn type national isdn map address ^011* plan isdn type international isdn bind-l3 ccm-manager isdn bchan-number-order ascending isdn outgoing display-ie no cdp enable CUCM... Device InformationProduct Cisco MGCP T1 Port Gateway BR1-RTR.proctorlabs.com Device Protocol Digital Access PRI Registration Unknown IP Address Unknown End-Point Name S0/SU0/ds...@br1-rtr.proctorlabs.com Best Regards, Randall Crumm Voice and Video Architect Global Networking & Telecom <image001.gif> <image002.gif> 1007 Gibraltar Drive Milpitas, CA 95035 Direct +1 408.576.7344 VoIP 6666.100.7344 Creating value that increases customer competitiveness Legal Disclaimer: The information contained in this message may be privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete or destroy any copy of this message _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
