Hi,
I'm testing RSVP between 2-ites using RSVP locations
It work good and AAR route the call as expected
Also TEHO calls consume from the RSVP bw
Only the problem is with the CUE at remote site that i think cause it use G711u
I was using MTP for RSVP , then when the call forwarded to CUE,, it give not
enough bw , call rerouting ,, although there still bw in rsvp
I decide to use transcoder as rsvp profile to solve CUE codec issue, But when
it is forwarded to CUE, nothing occue nor forwarded to CUE
Do I need any thing beside the transcoder profile so CUE can consume from RSVP
??
[note: AAR-CSS & AAR-Group & EPNM is configured fine for cue ports in cucm]
my sccp transcoder:
dspfarm profile 1 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec passthrough
rsvp
maximum sessions 3
associate application SCCP
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
