I'll try it in my next rack session that I don't have access now
But why RDP CSS need this mva-pt that i think it is only used to call outside
[as i was inside the company] and no need to see the mva again !!
From: gogli...@gmail.com
Date: Thu, 19 May 2011 19:14:38 +0100
Subject: Re: [OSL | CCIE_Voice] MVA disconnect
To: voice...@hotmail.com
CC: ccie_voice@onlinestudylist.com
well you need RDP CSS to have access to MVA number too mate...
2011/5/19 voice boy <voice...@hotmail.com>
no
only h323-gw have access to 2777 [mva-pt]
RDP CSS only have access to internal DNs and outside pstn numbers
From: gogli...@gmail.com
Date: Thu, 19 May 2011 18:46:11 +0100
Subject: Re: [OSL | CCIE_Voice] MVA disconnect
To: voice...@hotmail.com
CC: ccie_voice@onlinestudylist.com
Does the h323 gateway and RDP CSS both have access to 2777 MVA number
partition?
2011/5/19 voice boy <voice...@hotmail.com>
Hi gog,
Thanks for your reply
I have the same MVA no on the cucm as 2777
and try from h323-gw as BR1 , i hear the ivr but disconnect after i call press
# for outside call
and from HQ MGCP-gw I create DID as 1777 which translate to 2777 route pattern
[in internal pt] which send to h323-hq-gw dial-peer service mva then back to
cucm to mva number throguh h323-hq-gw to MVA no [mva-pt] that match the media
resource mva DN
so I'm trying MVA with both h323-gw at BR1 and at the same time at MGCP-gw at
HQ using DID
I created one RDP with its RD for each gw
But in both cases I get disconnect
MVA DN in service parameters and media resources is 2777
service parameter adjusted to use RDP CSS , so i put outside-CSS in my both RDP
but it was giving me ur call cann't be completed and then the new one is that
it is disconnecting
From: gogli...@gmail.com
Date: Thu, 19 May 2011 18:04:58 +0100
Subject: Re: [OSL | CCIE_Voice] MVA disconnect
To: voice...@hotmail.com
CC: ccie_voice@onlinestudylist.com
Hi mate,
Can you tell us how do you have it configured? There are quite a few steps that
have to be considered on MGCP, as the call has to be hairpinned.
It's not same as when it's h323 gateway, it's a bit more complicated, although
not much more.
Tell us what you have configured exactly, otherwise you can't know what can be
wrong.
But here are a few things that you can check
1) Media Resources -> Mobile Voice Access - number is configured correctly, and
it matches the number that you have in destination-patter on h323 gw dial-peer.
2) The CSS is correctly configured on the Gateway, or on the RDP, depending on
what you have in service parameters for CSS selection for MVA.
3) The h323 gateway CSS must have access to MVA number regardless of service
parameter...
And then many times, everything is well configured and it just does not work.
sometimes restart of MVA service helps... even sometimes various restarts.
Regards,
2011/5/19 voice boy <voice...@hotmail.com>
Hi,
I'm configuring MVA with h323 and MGCP and have a strange error
I was asked to enter remote destination ID
and success
when press 1 to dial the required number
after finish entering the number and #
the PSTN phone disconnect ,, it disconnect in case I'm dialing inside or
outisde calls..
Before I was having your call cann't be completed as dialed
But the issue become this disconnect
Please advise me the issue
Thanks
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
