interesting i'm going to try this on my session on Saturday

2011/5/19 CCIE for Me <cciefo...@hotmail.com>

>  Does anyone have issues with MVA when using the <none> partition for your
> internal DNs?
>
>  *From:* voice boy <voice...@hotmail.com>
> *Sent:* Thursday, May 19, 2011 8:50 PM
> *To:* gog ccie <gogli...@gmail.com>
> *Cc:* OSL Questions <ccie_voice@onlinestudylist.com>
> *Subject:* Re: [OSL | CCIE_Voice] MVA disconnect
>
> you are the man gog
> it work now :)
>
> ------------------------------
> From: gogli...@gmail.com
> Date: Thu, 19 May 2011 19:14:38 +0100
> Subject: Re: [OSL | CCIE_Voice] MVA disconnect
> To: voice...@hotmail.com
> CC: ccie_voice@onlinestudylist.com
>
> well you need RDP CSS to have access to MVA number too mate...
>
> 2011/5/19 voice boy <voice...@hotmail.com>
>
> no
> only h323-gw have access to 2777 [mva-pt]
>
> RDP CSS only have access to internal DNs and outside pstn numbers
>
> ------------------------------
> From: gogli...@gmail.com
> Date: Thu, 19 May 2011 18:46:11 +0100
>
> Subject: Re: [OSL | CCIE_Voice] MVA disconnect
> To: voice...@hotmail.com
> CC: ccie_voice@onlinestudylist.com
>
> Does the h323 gateway and RDP CSS both have access to 2777 MVA number
> partition?
>
>
> 2011/5/19 voice boy <voice...@hotmail.com>
>
>
>  Hi gog,
>
> Thanks for your reply
>
> I have the same MVA no on the cucm as 2777
>
> and try from h323-gw as BR1 , i hear the ivr but disconnect after i call
> press # for outside call
>
> and from HQ MGCP-gw I create DID as 1777 which translate to 2777 route
> pattern [in internal pt] which send to h323-hq-gw dial-peer service mva then
> back to cucm to mva number throguh h323-hq-gw to MVA no [mva-pt] that match
> the media resource mva DN
>
> so I'm trying MVA with both h323-gw at BR1 and at the same time at MGCP-gw
> at HQ using DID
> I created one RDP with its RD for each gw
>
> But in both cases I get disconnect
>
> MVA DN in service parameters and media resources is 2777
>
> service parameter adjusted to use RDP CSS , so i put outside-CSS in my both
> RDP
>
> but it was giving me ur call cann't be completed and then the new one is
> that it is disconnecting
>
> ------------------------------
> From: gogli...@gmail.com
> Date: Thu, 19 May 2011 18:04:58 +0100
> Subject: Re: [OSL | CCIE_Voice] MVA disconnect
> To: voice...@hotmail.com
> CC: ccie_voice@onlinestudylist.com
>
>
> Hi mate,
>
> Can you tell us how do you have it configured? There are quite a few steps
> that have to be considered on MGCP, as the call has to be hairpinned.
> It's not same as when it's h323 gateway, it's a bit more complicated,
> although not much more.
>
> Tell us what you have configured exactly, otherwise you can't know what can
> be wrong.
>
> But here are a few things that you can check
> 1) Media Resources -> Mobile Voice Access - number is configured correctly,
> and it matches the number that you have in destination-patter on h323 gw
> dial-peer.
> 2) The CSS is correctly configured on the Gateway, or on the RDP, depending
> on what you have in service parameters for CSS selection for MVA.
> 3) The h323 gateway CSS must have access to MVA number regardless of
> service parameter...
>
> And then many times, everything is well configured and it just does not
> work. sometimes restart of MVA service helps... even sometimes various
> restarts.
>
> Regards,
>
> 2011/5/19 voice boy <voice...@hotmail.com>
>
> Hi,
>
> I'm configuring MVA with h323 and MGCP and have a strange error
>
> I was asked to enter remote destination ID
> and success
>
> when press 1 to dial the required number
>
> after finish entering the number and #
>
> the PSTN phone disconnect ,, it disconnect in case I'm dialing inside or
> outisde calls..
>
> Before I was having your call cann't be completed as dialed
>
> But the issue become this disconnect
>
> Please advise me the issue
>
> Thanks
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com <http://www.platinumplacement.com/>
>
>
>
>
>  ------------------------------
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Reply via email to