Hi, G.729r8 is configured under the transcoder profile, this is i'm 100% sure about, and the transcoders are registered with CUCM.
I have HQ-IOS-MRGL which has HQ-IOS-MRG and this includes hq-xcoder and the same configuration for BR1 and both are registered correctly with CUCM. I've tried every possible combination. i.e I assigned br1-xcoder to HQ-MRG and vice versa for BR1, but i know that it is IPCC which should be invoking the transcoder resources. and the CTI ports are in the internal-pt/HQ-DP. This is why i'm going nuts and doesn't have any explanation to what's going on. Is there any missing configuration or setup i might be missing? Thanks Karim An On Mon, May 23, 2011 at 1:10 AM, Bartosz Sokolowski < ibartosz.sokolow...@gmail.com> wrote: > Hi, > > If your MRG/MRGL config is correct (CTI Ports have access to xcoder > resource) then it must work. Check if you have g729r8 codec in your dsp > profile on IOS. By default this codec is missing. > -- > Regards, > Bartosz > > 2011/5/22 Karim Hany <karimhan...@gmail.com> > >> Hi All, >> >> I have problem with invoking transcoder. I registered two IOS transcoders >> one for HQ & BR1 both are registered to CCM. The goal is BR1 should be able >> to call ICD pilot (CRS uses codec G711 only) number on HQ using codec G729. >> But it always fail to invoke transcoder at HQ and call fails and I get a >> fast busy tone. Call from HQ to ICD is ok because no transcoder is needed. >> However, when i call from BR1 to HQ via PSTN, the call gets through and I >> can hear the welcoming prompt. >> >> I've also tried to associate BR1 xcoder with HQ IOS MRG/MRGL which is >> assigned to HQ DP as if it's a local resource but still not working. >> >> Any idea on what could be the problem or misconfiguration. >> >> Appreciate your advice and inputs. >> >> Thanks >> >> Regards, >> >> Karim >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
