Make sure vlan 400 is up/up.
If not, that would do it.
Hth
----- Reply message -----
From: "Randall Crumm" <rrcr...@yahoo.com>
Date: Sun, May 29, 2011 5:07 pm
Subject: [OSL | CCIE_Voice] UCME/CUE
To: "Online Study" <ccie_voice@onlinestudylist.com>
HI,
I'm having a weird issue. (see snipits below)
I configured mt CME for CUE(not telephony-service yet) and I cannot ser ser 0/0
ses to it
I can ping 10.10.202.2 from hq rtr
The cli just has a blank like
Anyone have an ideas or run into this?
Thanks,
Randall
interface Service-Engine0/0
ip unnumbered Vlan400
service-module ip address 10.10.202.2 255.255.255.0
service-module ip default-gateway 10.10.202.1
ip route 10.10.202.2 255.255.255.255 Service-Engine0/0
interface Vlan400
ip address 10.10.202.1 255.255.255.0
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com