Thanks for the tips ! For my case, it was very bad. Pub and Sub wasn't sync when i modify some configuration. Hope in actual lab, don't encounter this issue.
On Mon, Jun 6, 2011 at 4:07 AM, Emin Guliyev <eguli...@fidelus.com> wrote: > Sidenote: NTP sync on pub will templorarliy bring down the replication to > “3” on pub( I have timed it to 10 minutes). In that case you just have to > wait. > > > > > > *From:* Ki Wi [mailto:kiwi.vo...@gmail.com] > *Sent:* Sunday, June 05, 2011 3:10 PM > *To:* Emin Guliyev > *Cc:* ccie_voice@onlinestudylist.com > *Subject:* Re: [OSL | CCIE_Voice] Replication issues - Found word(s) check > out in the Text body > > > > I faced this problem on my vmware recently. My Pub was "3". =( > > What I did was utils dpreplication stop ( on both pub and sub) then reset > all on pub. In the end, halfway I rebooted both callmanagers and proceed > with other task. Around 40 minutes later or less, both are back to 2! > > From my deployment experience, reboot will actually works provided it's > during a downtime of course. =) > > On Mon, Jun 6, 2011 at 2:14 AM, Emin Guliyev <eguli...@fidelus.com> wrote: > > Hey guys, > > > > > > I know that there has been previous posts on replication > issues. Just want to get a brief list of commands that you guys use to > tackle replication issues. > > My personal preferences are: > > > > If the replication on sub is “3” I would use these commands: > > > > Utils dbreplication stop à sub > > Utils dbreplication dropdbadmin à sub > > Utils dbreplication stop à pub > > Utils dbreplication dropdbadmin à pub > > Utils dbreplication repair all à pub > > > > > > If the replication is “4” on sub (which means Informix SDL TCP socket is > not established) > > > > Utils dbreplication stop à sub > > Utils dbreplication stop à pub > > Utils dbreplication reset all à pub > > > > > > Appreciate your input. > > > > PS: I figured, if I have to deal with replication issues in the lab. I will > proceed to stop CCM and tftp services on the sub and run on pub only during > the replication repair process. > > > > Regards, > > > > Emin > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
