Do we really need the "switchport trunk encap dotq1" command? Thanks
On 6/30/11 11:18 PM, "Bill Lake" <whl...@gmail.com> wrote: >Definitely > > >switchport trunk encap dotq1 >switchport mode trunk >switchport trunk native vlan XX >switchport voice vlan XX >spanning-tree portfast trunk >mls qos trust cos > >On Thu, Jun 30, 2011 at 9:02 PM, Cristobal Priego ><cristobalpri...@gmail.com> wrote: >> Hello all >> >> for the lab on the ESW modules on SiteB and SiteC which one is the best >> approach >> >> switchport trunk encap dotq1 >> switchport mode trunk >> switchport trunk native vlan XX >> switchport voice vlan XX >> spanning-tree portfast trunk >> mls qos trust cos >> >> or >> >> switchport mode acess >> switchport access vlan XX >> switchport voice vlan XX >> spanning-tree portfast ? >> mls qos trust cos >> >> >> This links shows how to configure ESW on ISR 2800 ios 12.4(T) >> >>http://www.cisco.com/en/US/products/hw/modules/ps2797/products_configurat >>ion_example09186a00808066b8.shtml#step4 >> >> >> any comments ? >> I'd really appreciate those >> >> thanks >> wheneve >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, >>please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> >_______________________________________________ >For more information regarding industry leading CCIE Lab training, please >visit www.ipexpert.com > >Are you a CCNP or CCIE and looking for a job? Check out >www.PlatinumPlacement.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com