nevermind i figured it out thanks
2011/7/10 Cristobal Priego <cristobalpri...@gmail.com> > hello all > > I know we have address this issue several times > > i'm configuring MLP manually and this is how i have HQ configured > > int serial 0/0/1:0.1 > bandwidth 384 > > int serial 0/0/1:0 > frame-relay traffic-shapping > > > > class-map VOICE > match ip dscp ef > class-map match-any SIG > match ip dscp cs3 > match ip dscp af31 > > > policy-map VOIP > class VOICE > priority percent 33 > class SIG > bandwidth percent 5 > class class-default > fair-queue > > > map-class frame-relay myconfig > frame-relay cir 384000 > frame-relay mincir 384000 > frame-relay be 0 > frame-relay bc 3840 > > > int virtual-template 1 > ip address 10.10.111.1 255.255.255.0 > bandwidth 384 > ppp multilink > ppp multilint interleave > ppp multilink fragment delay 10 > service-policy out VOIP > > > int serial 0/0/1:0.1 > > no ip add > no frame-relay interface-dlci > frame-relay interface-dlci 201 ppp virtual-template 1 > no sh > class myconfig > > > Branch1 is pretty much the same > > when i reload Branch1 I lose connectivity to HQ > > so i go to HQ and go to the sub interface > and remove > frame-relay interface-dlci 201 ppp virtual-template1 > > add it back in > do the same on branch1 > > and i have connectivity back > > however as soon as i reload either the branc1 or hq router > I lose connectivity again and i have to issue the same workaround to get it > to work again > > what do you guys recommend on this issue ? > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
