hi Ash, Thanks, this is very make sense. I will test in my next session. I was able to ping from router to PUB 10.10.210.10. I have loaded with basic image in proctor rack,should not be any ACL blocking it, And from their diagram it only show BR router connect thru FR to PUB. tks
--- On Thu, 7/21/11, Ashraf Ayyash <ash.ayy...@gmail.com> wrote: From: Ashraf Ayyash <ash.ayy...@gmail.com> Subject: Re: [OSL | CCIE_Voice] Fw: MVA load issue in proctor rack To: "Adil Shaikh" <adil.sha...@gmail.com> Cc: "Erwan Erwan" <e_er...@yahoo.com>, ccie_voice@onlinestudylist.com Received: Thursday, July 21, 2011, 4:09 PM Hello All , This error indicates that while loading the script, the VXML file IVRMainpage.vxml failed to be downloaded from 10.10.210.10:8080 (HTTP GET). maybe a firewall in the network is blocking the request from your GW interface to 10.10.210.10:8080 or the GET HTTP souce ip is the reason of this problem but finally this is a connectivity issue , i have seen some other post here for people who have MVA VXML loaded but they have another issue , not sure how proctor lab is working internal but this is the reason of the fail of loading the VMXL script , you can Telnet/ping/traces route using specific interface sources etc.. if you found that there router to 10.10.210.10 is routable from specific source you can add static route for 10.10.210.10 via the routable interface . #The reason for the static route is because of the fact that the router will always use the interface closest to the destination, there is no command to bind the http to an specific interface so static route can be a solution for such situations Best regards Ash On Thu, Jul 21, 2011 at 10:00 AM, Adil Shaikh <adil.sha...@gmail.com> wrote: > > hi Erwan, > > is this H323 gateway or MGCP gatway? > > if this is H323 gateway you do not need to do hairpinning, > > if mgcp then you need to do hairpinning, > > > most likely, you are getting error message due to 'server mwa' command in > voip and pots dialpeer. > > could you please post your full config of this router. > > thanks > -adil > > > > On Thu, Jul 21, 2011 at 4:07 PM, Erwan Erwan <e_er...@yahoo.com> wrote: >> >> hi Vik and others, >> >> Have you ever encounter this on proctor rack. Router will not load the MVA >> application. >> >> ( i have reset PUB and router ,still same) >> >> Wondering if this is VM bug or proctor ruouter error and what is the >> workaround ? >> >> ======== >> Jul 21 10:52:15.755: //-1//HIFS:/hifs_http_cb: hifs http callback: load of >> http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml failed. Status=httpc >> error -5=internal client transmit error >> *Jul 21 10:52:15.755: //-1//HIFS:/hifs_free_idata: hifs_free_idata: >> 0x4A3668DC >> *Jul 21 10:52:15.755: //-1//HIFS:/hifs_hold_idata: hifs_hold_idata: >> 0x4A3668DC >> *Jul 21 10:52:15.755: Could not load IVR script >> http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml >> >> >> --- On Thu, 7/21/11, Erwan Erwan <e_er...@yahoo.com> wrote: >> >> From: Erwan Erwan <e_er...@yahoo.com> >> Subject: MVA load issue in proctor rack >> To: vma...@ipexpert.com >> Cc: supp...@ipexpert.com >> Received: Thursday, July 21, 2011, 1:09 AM >> >> hi Vik, >> >> I have encountered sevreral times, running MVA application (this always work >> most time in rack). In rack 11, I have this issue and other rack not >> remember. >> >> - I have reset and restart UCM PUB , reload router, check connectivity from >> router to PUB >> >> but still give me failed on load MVA >> >> here is my error >> ============== >> l 20 03:31:45.271: //-1//HIFS:/hifs_http_cb: hifs http callback: load of >> http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml failed. Status=httpc >> error -2=internal client timeout error >> *Jul 20 03:31:45.271: //-1//HIFS:/hifs_free_idata: hifs_free_idata: >> 0x4A829DAC >> *Jul 20 03:31:45.271: //-1//HIFS:/hifs_hold_idata: hifs_hold_idata: >> 0x4A829DAC >> *Jul 20 03:31:45.271: Could not load IVR script >> http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml >> >> >> version of pod 11 >> ------------------------ >> ystem returned to ROM by reload at 21:52:33 UTC Tue Jul 19 2011 >> System restarted at 19:07:10 CDT Tue Jul 19 2011 >> System image file is "flash:c2800nm-adventerprisek9_ivs-mz.124-20.T1.bin" >> >> >> config >> ----------- >> >> application >> >> service mwa http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml >> >> >> >> dial-peer voice 410 voip >> >> service mwa >> >> destination-pattern 3000 >> >> voice-class codec 1 >> >> session target ipv4:10.10.210.10 >> >> dtmf-relay h245-alphanumeric >> >> no vad >> >> >> >> >> >> dial-peer voice 4101 pots >> >> service mwa >> >> incoming called-number 3000 >> >> >> >> voice service voip >> >> allow-connections h323 to h323 >> >> allow-connections h323 to sip >> >> allow-connections sip to h323 >> >> allow-connections sip to sip >> >> >> >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com > > > > -- > . . . . > _7___|___|_|_| adil.sha...@gmail.com > . . > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
