The mwi-relay is required when you have phones registered to multiple CMEs with a mailbox in CUE.
For your second question- if you have "mwi sip" in ephone-dn then you don't need unsolicited. But unsolicited would not break mwi if you did use it. Vik Malhi – CCIE #13890 Managing Partner - IPexpert, Inc. Telephone: +1.810.326.1444 ext 420 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com On Oct 24, 2011, at 12:51 PM, zamuel del Toro wrote: > > O.k I read the blog and make me clear, I only have one more question?, when > is used the mwi-relay on telephony-services and on voice register global mwi > reg e64? > > because on unsolicited just need > sip-ua > mwi-server ........ unsolicited > > > > and on subcribe notifiy > sip-ua > mwi-server........ > > ephone-dn > mwi sip > > > I notice to that when we have cucm-cue and phones are gone to srst the auto > provitioning ephone-dn include mw sip even when cue is on unsolicited. that > mean that cue must be subscribe notifiy and not unsolicited?. > > > thanks everyone. > > > > > Date: Sun, 23 Oct 2011 21:03:30 -0500 > > From: ash.ayy...@gmail.com > > To: ccielab...@gmail.com > > CC: ccie_voice@onlinestudylist.com > > Subject: Re: [OSL | CCIE_Voice] cue-cme mwi unsolicited question > > > > Glad its all sorted out now , > > > > Thanks > > Ash > > > > On Sun, Oct 23, 2011 at 8:57 PM, ccielabrat <ccielab...@gmail.com> wrote: > > > Hey Ashraf, > > > > > > You got me thinking the right way. > > > I had a mismatch between my sip interface and the gateway configured on > > > CUE. > > > > > > Thanks! > > > > > > > > > On Sat, Oct 22, 2011 at 4:43 PM, Ashraf Ayyash <ash.ayy...@gmail.com> > > > wrote: > > >> > > >> did you binded the SIP to the correct interface from the CME config > > >> Voice service Voip ? > > >> > > >> Any chance to reload the Funky CUE ? > > >> > > >> Ash > > >> > > >> On Sat, Oct 22, 2011 at 12:12 PM, ccielabrat <ccielab...@gmail.com> > > >> wrote: > > >> > I can't get CUE MWI working either. > > >> > > > >> > This is my cue config for SIP > > >> > > > >> > ccn subsystem sip > > >> > gateway address "10.1.131.1" > > >> > mwi envelope-info > > >> > mwi sip unsolicited > > >> > end subsystem > > >> > > > >> > I've tried all kinds of config on the CME router without success. > > >> > > > >> > When running "debug ccsip messages" on the CME router , I don't see > > >> > anything > > >> > if I issue "mwi refresh all" on CUE, even though I can dial into CUE > > >> > and > > >> > check to hear a voicemail on dn 4001 > > >> > > > >> > > > >> > > > >> > On Fri, Oct 21, 2011 at 6:47 PM, Brian <btmulg...@gmail.com> wrote: > > >> >> > > >> >> hi - this is an excellent summary of mwi for cue that is worth a read > > >> >> > > >> >> http://blog.ipexpert.com/2010/07/19/sip-mwi-mechansims-on-cue-notify/ > > >> >> > > >> >> Sent from my iPad > > >> >> > > >> >> On 21 Oct 2011, at 21:23, Ashraf Ayyash <ash.ayy...@gmail.com> wrote: > > >> >> > > >> >> > Hello Zamuel , > > >> >> > > > >> >> > the mwi relay command is only needed in case of the subscribe notify > > >> >> > MWI and its not needed in case of using Unsolicited because it does > > >> >> > send the event to the phone using NOTIFY message no matter it > > >> >> > subscribed to the MWI server Or not . > > >> >> > > > >> >> > Ash > > >> >> > > > >> >> > On Fri, Oct 21, 2011 at 11:21 AM, zamuel del Toro > > >> >> > <sdelto...@hotmail.com> wrote: > > >> >> >> Hi Vic, how is it going?, > > >> >> >> > > >> >> >> about mwi unsolicited. > > >> >> >> > > >> >> >> sip-ua > > >> >> >> mwi...... unsolicited > > >> >> >> > > >> >> >> telephony-ser > > >> >> >> mwi relay > > >> >> >> > > >> >> >> ephone-dn > > >> >> >> nothing.... > > >> >> >> > > >> >> >> > > >> >> >> works mwi > > >> >> >> > > >> >> >> if subscribe notify > > >> >> >> sip-ua > > >> >> >> mwi....... > > >> >> >> telephony-ser > > >> >> >> nothing > > >> >> >> > > >> >> >> ephone-dn > > >> >> >> mwi sip > > >> >> >> > > >> >> >> > > >> >> >> both works fine > > >> >> >> what if make mistake if on unsolicited include on ephone-dn > > >> >> >> mwi sip, > > >> >> >> that work too. is wrong do this? > > >> >> >> > > >> >> >> > > >> >> >> thanks > > >> >> >> > > >> >> >> > > >> >> >> > > >> >> >> > > >> >> >> > > >> >> >> _______________________________________________ > > >> >> >> For more information regarding industry leading CCIE Lab training, > > >> >> >> please > > >> >> >> visit www.ipexpert.com > > >> >> >> > > >> >> >> Are you a CCNP or CCIE and looking for a job? Check out > > >> >> >> www.PlatinumPlacement.com > > >> >> >> > > >> >> > _______________________________________________ > > >> >> > For more information regarding industry leading CCIE Lab training, > > >> >> > please visit www.ipexpert.com > > >> >> > > > >> >> > Are you a CCNP or CCIE and looking for a job? Check out > > >> >> > www.PlatinumPlacement.com > > >> >> _______________________________________________ > > >> >> For more information regarding industry leading CCIE Lab training, > > >> >> please > > >> >> visit www.ipexpert.com > > >> >> > > >> >> Are you a CCNP or CCIE and looking for a job? Check out > > >> >> www.PlatinumPlacement.com > > >> > > > >> > > > > > > > > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > > visit www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > > www.PlatinumPlacement.com > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com