If by wall jack you mean analog line from the provider then just plug it into one of the FXO lines and PLAR the call to either the auto attendant or a phone. Outbound calling will work also, just not at the same time.
Sent from my iPhone On Nov 1, 2011, at 7:17 PM, Jonathan Preston <jonathan_preston2...@yahoo.com> wrote: > I have a quick question. I have to do a demo with a UC500 at a hotel and the > onsite engineer will only allow a connections into a wall Jack. My question > is can I connect the FXS port to the wall jack and route a call from the > PSTN. The hotel is going to provide a DID for the demo. They will not let > us connect directly into switch port on their PBX. He said he would provide > me an IP Address but no connection to the PBX. > > _______________________________________________ > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com