dont debug the code level, deb h245 asn1 will show you the tcs negotiation failure
Ash On Thu, Dec 1, 2011 at 8:12 AM, ccielabrat <ccielab...@gmail.com> wrote: > I'm trying to setup a call from HQ CUCM via GK-Trunk to a Remote Gk Zone. > > I have the Gatekeeper configured with OutVia for the remote zone referencing > a CUBE on the HQ router. > > I didn't realize (but it makes sense now) that with "Wait for H.245" > unchecked on on the CUCM trunk, the call setup goes to the GK/CUBE as g.711. > > This obviously causes a problem when the CUBE (by default) tries to create > the outgoing call leg to the remote zone using G.729. > > I don't have an XCoder available to CUBE at this point. > > My problem is that I can't see the codec mismatch failure in "debug cch323 > h225 " or "debug cch323 h245". > (If it's in there , I'm not seeing :) ) > > Can someone help me understand if the failure is noted in either of these > debugs > Or > Point me towards a debug that would show the codec mismatch problem? > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com