You need an ephone-dn for conferencing - it does not need to be a dialable number. Add something like:
ephone-dn 10 octo number a01 Conference ad-hoc Also, under telephony-service do "conference hardware" DQ d...@cisco.com Sent from my iPhone On Jun 4, 2012, at 3:52 PM, "Krishna" <vinayak_...@yahoo.com> wrote: > Hi folks, > > i configured the transcoder and conference resources on the CME, but couldn't > make them to work. When i want to conference the line, it says cannot > complete the conference. > > here is my config: Did i miss any configuration part in this below config???? > > > > sccp local FastEthernet0/0 > sccp ccm 10.50.5.1 identifier 1 version 7.0 > sccp > ! > sccp ccm group 1 > bind interface FastEthernet0/0 > associate ccm 1 priority 1 > associate profile 1 register Conference > associate profile 2 register mtp(mac-address of sourceinterface) > keepalive retries 5 > switchover method immediate > switchback method immediate > switchback interval 5 > ! > dspfarm profile 2 transcode > codec g711ulaw > codec g711alaw > codec g729ar8 > codec g729abr8 > codec g729r8 > codec g729br8 > maximum sessions 24 > associate application SCCP > ! > dspfarm profile 1 conference > codec g711ulaw > codec g729r8 > codec g729br8 > codec g729abr8 > codec g729ar8 > maximum sessions 4 > associate application SCCP > > here is the status of sccp: > > > SCCP Admin State: UP > Gateway Local Interface: FastEthernet0/0 > IPv4 Address: 10.50.5.1 > Port Number: 2000 > IP Precedence: 5 > User Masked Codec list: None > Call Manager: 10.50.5.1, Port Number: 2000 > Priority: N/A, Version: 7.0, Identifier: 1 > Trustpoint: N/A > > Transcoding Oper State: ACTIVE - Cause Code: NONE > Active Call Manager: 10.50.5.1, Port Number: 2000 > TCP Link Status: CONNECTED, Profile Identifier: 2 > Reported Max Streams: 48, Reported Max OOS Streams: 0 > Supported Codec: g711ulaw, Maximum Packetization Period: 30 > Supported Codec: g711alaw, Maximum Packetization Period: 30 > Supported Codec: g729ar8, Maximum Packetization Period: 60 > Supported Codec: g729abr8, Maximum Packetization Period: 60 > Supported Codec: g729r8, Maximum Packetization Period: 60 > Supported Codec: g729br8, Maximum Packetization Period: 60 > Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 > Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 > Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization > Period: 30 > > Conferencing Oper State: ACTIVE - Cause Code: NONE > Active Call Manager: 10.50.5.1, Port Number: 2000 > TCP Link Status: CONNECTED, Profile Identifier: 1 > Reported Max Streams: 32, Reported Max OOS Streams: 0 > Supported Codec: g711ulaw, Maximum Packetization Period: 30 > Supported Codec: g729r8, Maximum Packetization Period: 60 > Supported Codec: g729br8, Maximum Packetization Period: 60 > Supported Codec: g729abr8, Maximum Packetization Period: 60 > Supported Codec: g729ar8, Maximum Packetization Period: 60 > Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 > Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 > Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization > Period: 30 > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com