Greetings Krishna, What does you telephony service configuration look like. Below is a working example that I have built in my lab with CME registered to gatekeeper.
10.1.10.1 is the loopback address sccp local Loopback0 sccp ccm 10.1.10.1 identifier 1 priority 1 version 7.0 sccp ! sccp ccm group 1 associate ccm 1 priority 1 associate profile 2 register conference associate profile 1 register transcoder ! dspfarm profile 1 transcode codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 maximum sessions 4 associate application SCCP ! dspfarm profile 2 conference codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 6 conference-join custom-cptone join conference-leave custom-cptone leave associate application SCCP telephony-service sdspfarm units 6 sdspfarm transcode sessions 3 sdspfarm conference sessions 3 sdspfarm tag 1 transcoder sdspfarm tag 2 conference no privacy conference hardware no auto-reg-ephone xml user pvadmin password cisco 15 max-ephones 10 max-dn 20 no-reg ip source-address 10.1.10.1 port 2000 strict-match url authentication http:// 10.1.10.1 /CCMCIP/authenticate.asp pvphone cisco time-zone 42 time-format 24 voicemail 4220 max-conferences 8 gain -6 web admin system name admin password cisco transfer-system full-consult transfer-pattern .T create cnf-files version-stamp 7960 Jun 4 2012 02:36:34 Hope this helps, Best Regards --ms -----Original Message----- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccie_voice-requ...@onlinestudylist.com Sent: Monday, June 04, 2012 3:24 PM To: ccie_voice@onlinestudylist.com Subject: CCIE_Voice Digest, Vol 76, Issue 7 Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than "Re: Contents of CCIE_Voice digest..." Today's Topics: 1. Re: cannot conference on CME (Krishna) 2. Re: cannot conference on CME (Jeff Mchugh) 3. Re: cannot conference on CME (chase mergenthal) ---------------------------------------------------------------------- Message: 1 Date: Mon, 4 Jun 2012 12:02:20 -0700 (PDT) From: Krishna <vinayak_...@yahoo.com> To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> Subject: Re: [OSL | CCIE_Voice] cannot conference on CME Message-ID: <1338836540.25074.yahoomail...@web46008.mail.sp1.yahoo.com> Content-Type: text/plain; charset="iso-8859-1" Hi folks, i configured the transcoder and conference resources on the CME, but couldn't make them to work. When i want to conference the line, it says cannot complete the conference. here is my config: Did i miss any configuration part in this below config???? sccp local FastEthernet0/0 sccp ccm 10.50.5.1 identifier 1 version 7.0 sccp ! sccp ccm group 1 ?bind interface FastEthernet0/0 ?associate ccm 1 priority 1 ?associate profile 1 register Conference ?associate profile 2 register mtp(mac-address of sourceinterface) ?keepalive retries 5 ?switchover method immediate ?switchback method immediate ?switchback interval 5 ! dspfarm profile 2 transcode ?codec g711ulaw ?codec g711alaw ?codec g729ar8 ?codec g729abr8 ?codec g729r8 ?codec g729br8 ?maximum sessions 24 ?associate application SCCP ! dspfarm profile 1 conference ?codec g711ulaw ?codec g729r8 ?codec g729br8 ?codec g729abr8 ?codec g729ar8 ?maximum sessions 4 ?associate application SCCP here is the status of sccp: SCCP Admin State: UP Gateway Local Interface: FastEthernet0/0 ? ? ? ? IPv4 Address: 10.50.5.1 ? ? ? ? Port Number: 2000 IP Precedence: 5 User Masked Codec list: None Call Manager: 10.50.5.1, Port Number: 2000 ? ? ? ? ? ? ? ? Priority: N/A, Version: 7.0, Identifier: 1 ? ? ? ? ? ? ? ? Trustpoint: N/A Transcoding Oper State: ACTIVE - Cause Code: NONE Active Call Manager: 10.50.5.1, Port Number: 2000 TCP Link Status: CONNECTED, Profile Identifier: 2 Reported Max Streams: 48, Reported Max OOS Streams: 0 Supported Codec: g711ulaw, Maximum Packetization Period: 30 Supported Codec: g711alaw, Maximum Packetization Period: 30 Supported Codec: g729ar8, Maximum Packetization Period: 60 Supported Codec: g729abr8, Maximum Packetization Period: 60 Supported Codec: g729r8, Maximum Packetization Period: 60 Supported Codec: g729br8, Maximum Packetization Period: 60 Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 Conferencing Oper State: ACTIVE - Cause Code: NONE Active Call Manager: 10.50.5.1, Port Number: 2000 TCP Link Status: CONNECTED, Profile Identifier: 1 Reported Max Streams: 32, Reported Max OOS Streams: 0 Supported Codec: g711ulaw, Maximum Packetization Period: 30 Supported Codec: g729r8, Maximum Packetization Period: 60 Supported Codec: g729br8, Maximum Packetization Period: 60 Supported Codec: g729abr8, Maximum Packetization Period: 60 Supported Codec: g729ar8, Maximum Packetization Period: 60 Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 -------------- next part -------------- An HTML attachment was scrubbed... URL: </archives/ccie_voice/attachments/20120604/c49d1caf/attachment-0001.html> ------------------------------ Message: 2 Date: Mon, 4 Jun 2012 15:55:52 -0400 From: Jeff Mchugh <jeff.mch...@att.net> To: Krishna <vinayak_...@yahoo.com> Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> Subject: Re: [OSL | CCIE_Voice] cannot conference on CME Message-ID: <e1cabf21-4f07-400b-9ae6-e5e859046...@att.net> Content-Type: text/plain; charset="us-ascii" Try adding g711alaw under conferencing Sent from my iPhone On Jun 4, 2012, at 3:02 PM, Krishna <vinayak_...@yahoo.com> wrote: > Hi folks, > > i configured the transcoder and conference resources on the CME, but couldn't > make them to work. When i want to conference the line, it says cannot > complete the conference. > > here is my config: Did i miss any configuration part in this below config???? > > > > sccp local FastEthernet0/0 > sccp ccm 10.50.5.1 identifier 1 version 7.0 sccp ! > sccp ccm group 1 > bind interface FastEthernet0/0 > associate ccm 1 priority 1 > associate profile 1 register Conference associate profile 2 register > mtp(mac-address of sourceinterface) keepalive retries 5 switchover > method immediate switchback method immediate switchback interval 5 ! > dspfarm profile 2 transcode > codec g711ulaw > codec g711alaw > codec g729ar8 > codec g729abr8 > codec g729r8 > codec g729br8 > maximum sessions 24 > associate application SCCP > ! > dspfarm profile 1 conference > codec g711ulaw > codec g729r8 > codec g729br8 > codec g729abr8 > codec g729ar8 > maximum sessions 4 > associate application SCCP > > here is the status of sccp: > > > SCCP Admin State: UP > Gateway Local Interface: FastEthernet0/0 > IPv4 Address: 10.50.5.1 > Port Number: 2000 > IP Precedence: 5 > User Masked Codec list: None > Call Manager: 10.50.5.1, Port Number: 2000 > Priority: N/A, Version: 7.0, Identifier: 1 > Trustpoint: N/A > > Transcoding Oper State: ACTIVE - Cause Code: NONE Active Call Manager: > 10.50.5.1, Port Number: 2000 TCP Link Status: CONNECTED, Profile > Identifier: 2 Reported Max Streams: 48, Reported Max OOS Streams: 0 > Supported Codec: g711ulaw, Maximum Packetization Period: 30 Supported > Codec: g711alaw, Maximum Packetization Period: 30 Supported Codec: > g729ar8, Maximum Packetization Period: 60 Supported Codec: g729abr8, > Maximum Packetization Period: 60 Supported Codec: g729r8, Maximum > Packetization Period: 60 Supported Codec: g729br8, Maximum > Packetization Period: 60 Supported Codec: rfc2833 dtmf, Maximum > Packetization Period: 30 Supported Codec: rfc2833 pass-thru, Maximum > Packetization Period: 30 Supported Codec: inband-dtmf to rfc2833 > conversion, Maximum Packetization Period: 30 > > Conferencing Oper State: ACTIVE - Cause Code: NONE Active Call > Manager: 10.50.5.1, Port Number: 2000 TCP Link Status: CONNECTED, > Profile Identifier: 1 Reported Max Streams: 32, Reported Max OOS > Streams: 0 Supported Codec: g711ulaw, Maximum Packetization Period: 30 > Supported Codec: g729r8, Maximum Packetization Period: 60 Supported > Codec: g729br8, Maximum Packetization Period: 60 Supported Codec: > g729abr8, Maximum Packetization Period: 60 Supported Codec: g729ar8, > Maximum Packetization Period: 60 Supported Codec: rfc2833 dtmf, > Maximum Packetization Period: 30 Supported Codec: rfc2833 pass-thru, > Maximum Packetization Period: 30 Supported Codec: inband-dtmf to > rfc2833 conversion, Maximum Packetization Period: 30 > _______________________________________________ > For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com -------------- next part -------------- An HTML attachment was scrubbed... URL: </archives/ccie_voice/attachments/20120604/a1b5a32d/attachment-0001.html> ------------------------------ Message: 3 Date: Mon, 4 Jun 2012 16:23:39 -0500 From: chase mergenthal <cm3_...@hotmail.com> To: <jeff.mch...@att.net>, <vinayak_...@yahoo.com> Cc: ccie voice <ccie_voice@onlinestudylist.com> Subject: Re: [OSL | CCIE_Voice] cannot conference on CME Message-ID: <blu171-w200d331d09e79027c75658d6...@phx.gbl> Content-Type: text/plain; charset="windows-1252" Can you send a copy of the CME config? Also, are the DN's Octo lines? -Chase ------------------------------------------------------------------------------------------------------ If winners never quit and quitters never win, then who coined the phrase, "Quit while you?re still ahead."? From: jeff.mch...@att.net Date: Mon, 4 Jun 2012 15:55:52 -0400 To: vinayak_...@yahoo.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] cannot conference on CME Try adding g711alaw under conferencing Sent from my iPhone On Jun 4, 2012, at 3:02 PM, Krishna <vinayak_...@yahoo.com> wrote: Hi folks, i configured the transcoder and conference resources on the CME, but couldn't make them to work. When i want to conference the line, it says cannot complete the conference. here is my config: Did i miss any configuration part in this below config???? sccp local FastEthernet0/0sccp ccm 10.50.5.1 identifier 1 version 7.0sccp!sccp ccm group 1 bind interface FastEthernet0/0 associate ccm 1 priority 1 associate profile 1 register Conference associate profile 2 register mtp(mac-address of sourceinterface) keepalive retries 5 switchover method immediate switchback method immediate switchback interval 5!dspfarm profile 2 transcode codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 24 associate application SCCP!dspfarm profile 1 conference codec g711ulaw codec g729r8 codec g729br8 codec g729abr8 codec g729ar8 maximum sessions 4 associate application SCCP here is the status of sccp: SCCP Admin State: UPGateway Local Interface: FastEthernet0/0 IPv4 Address: 10.50.5.1 Port Number: 2000IP Precedence: 5User Masked Codec list: NoneCall Manager: 10.50.5.1, Port Number: 2000 Priority: N/A, Version: 7.0, Identifier: 1 Trustpoint: N/A Transcoding Oper State: ACTIVE - Cause Code: NONEActive Call Manager: 10.50.5.1, Port Number: 2000TCP Link Status: CONNECTED, Profile Identifier: 2Reported Max Streams: 48, Reported Max OOS Streams: 0Supported Codec: g711ulaw, Maximum Packetization Period: 30Supported Codec: g711alaw, Maximum Packetization Period: 30Supported Codec: g729ar8, Maximum Packetization Period: 60Supported Codec: g729abr8, Maximum Packetization Period: 60Supported Codec: g729r8, Maximum Packetization Period: 60Supported Codec: g729br8, Maximum Packetization Period: 60Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 Conferencing Oper State: ACTIVE - Cause Code: NONEActive Call Manager: 10.50.5.1, Port Number: 2000TCP Link Status: CONNECTED, Profile Identifier: 1Reported Max Streams: 32, Reported Max OOS Streams: 0Supported Codec: g711ulaw, Maximum Packetization Period: 30Supported Codec: g729r8, Maximum Packetization Period: 60Supported Codec: g729br8, Maximum Packetization Period: 60Supported Codec: g729abr8, Maximum Packetization Period: 60Supported Codec: g729ar8, Maximum Packetization Period: 60Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -------------- next part -------------- An HTML attachment was scrubbed... URL: </archives/ccie_voice/attachments/20120604/a37092fc/attachment.html> ------------------------------ _______________________________________________ CCIE_Voice mailing list CCIE_Voice@onlinestudylist.com http://onlinestudylist.com/mailman/listinfo/ccie_voice End of CCIE_Voice Digest, Vol 76, Issue 7 ***************************************** _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
