So is you hq a mgcp? If so it looks like you are missing your isdn bind-l3 ccm command
Is it h323 or maybe stand alone cme with just a plan pri? If h323 the does it show status in gateways? Does it show unknown unknown instead of unknown and ip? Try to give us more and clearer information because right now all we know is pri, but most likely hq is a gateway for CUCM and we don't know what type. We don't know if this is your lab, rack rental or real world. It is very helpful to have this information to be able to give you help. Bill On Jan 9, 2013, at 3:38 AM, Heath Williams <heath...@gmail.com> wrote: > Hi, > > I had a similar issue on a production network from a cm to cme on net. > > Look at your dial-peers and also your class codec applied to them. > > Also try using the ccapi inout and the asn 245 debugs to fault find. > > Hope this helps. > > Sent from my iPhone > > On 09/01/2013, at 8:03 PM, Nicolas MICHEL <mcl.nico...@gmail.com> wrote: > >> Hey Guys ! >> >> I feel like I am doomed :D >> When I am calling 911/9911 from HQ, the calls fails. >> It makes the PSTN phones ring and then it automagically disconnect the call. >> >> ISDN Q931 debugs says that the requested circuit is not available, I have >> tried isdn bchan ascending and descending order but with NO luck :( >> >> The problem is that the incoming calls from the PSTN on both channel (1 and >> 3 => Fractionnal PRI) are working properly :D >> >> >> If anyone has an idea I would be glad to hear it :D >> >> >> Thanks !! >> >> Nic !! >> >> >> >> >> HQ-RTR# >> HQ-RTR# >> HQ-RTR# >> HQ-RTR# >> *Jan 9 08:58:55.739: ISDN Se0/0/0:23 Q931: pak_private_number: Invalid >> type/plan 0x0 0x0 may be overriden; sw-type 13 >> *Jan 9 08:58:55.743: ISDN Se0/0/0:23 Q931: Applying typeplan for sw-type >> 0xD is 0x2 0x1, Calling num 2123945002 >> *Jan 9 08:58:55.743: ISDN Se0/0/0:23 Q931: Applying typeplan for sw-type >> 0xD is 0x0 0x0, Called num 911 >> *Jan 9 08:58:55.743: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref = >> 0x0081 >> Bearer Capability i = 0x8090A2 >> Standard = CCITT >> Transfer Capability = Speech >> Transfer Mode = Circuit >> Transfer Rate = 64 kbit/s >> Channel ID i = 0xA98383 >> Exclusive, Channel 3 >> Calling Party Number i = 0x2181, '2123945002' >> Plan:ISDN, Type:National >> Called Party Number i = 0x80, '911' >> Plan:Unknown, Type:Unknown >> *Jan 9 08:58:55.775: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8 callref >> = 0x8081 >> Channel ID i = 0xA98383 >> Exclusive, Channel 3 >> *Jan 9 08:58:55.787: ISDN Se0/0/0:23 Q931: RX <- ALERTING pd = 8 callref = >> 0x8081 >> Pro >> HQ-RTR#gress Ind i = 0x8188 - In-band info or appropriate now available >> *Jan 9 08:58:55.831: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 callref >> = 0x0081 >> Cause i = 0x80AC - Requested circuit/channel not available >> *Jan 9 08:58:55.843: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref = >> 0x8081 >> *Jan 9 08:58:55.847: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 >> callref = 0x0081 >> HQ-RTR# >> HQ-RTR# >> HQ-RTR# >> HQ-RTR#config t >> Enter configuration commands, one per line. End with CNTL/Z. >> HQ-RTR(config)#int s0/0/0:23 >> HQ-RTR(config-if)#isdn bchan as >> HQ-RTR(config-if)# >> *Jan 9 08:59:26.131: ISDN Se0/0/0:23 Q931: pak_private_number: Invalid >> type/plan 0x0 0x0 may be overriden; sw-type 13 >> *Jan 9 08:59:26.131: ISDN Se0/0/0:23 Q931: Applying typeplan for sw-type >> 0xD is 0x2 0x1, Calling num 2123945002 >> *Jan 9 08:59:26.131: ISDN Se0/0/0:23 Q931: Applying typeplan for sw-type >> 0xD is 0x0 0x0, Called num 911 >> *Jan 9 08:59:26.135: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref = >> 0x0082 >> Bearer Capability i = 0x8090A2 >> Standard = CCITT >> Transfer Capability = Speech >> Transfer Mode = Circuit >> Transfer Rate = 64 kbit/s >> Channel ID i = 0xA98381 >> Exclusive, Channel 1 >> Calling Party Number i = 0x2181, '2123945002' >> Plan:ISDN, Type:National >> Called Party Number i = 0x80, '911' >> Plan:Unknown, Type:Unknown >> *Jan 9 08:59:26.171: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8 callref >> = 0x8082 >> Channel ID i = 0xA98381 >> Exclusive, Channel 1 >> *Jan 9 08:59:26.179: ISDN Se0/0/0:23 Q931: RX <- ALERTING pd = 8 callref = >> 0x8082 >> Pro >> HQ-RTR(config-gress Ind i = 0x8188 - In-band info or appropriate now >> available >> *Jan 9 08:59:26.223: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 callref >> = 0x0082 >> Cause i = 0x80AC - Requested circuit/channel not available >> *Jan 9 08:59:26.231: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref = >> 0x8082 >> *Jan 9 08:59:26.235: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 >> callref = 0x0082if)# >> HQ-RTR(config-if)# >> *Jan 9 08:59:43.227: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref = >> 0x0084 >> Bearer Capability i = 0x8090A2 >> Standard = CCITT >> Transfer Capability = Speech >> Transfer Mode = Circuit >> Transfer Rate = 64 kbit/s >> Channel ID i = 0xA98381 >> Exclusive, Channel 1 >> Progress Ind i = 0x8583 - Origination address is non-ISDN >> Display i = 'Emergency Services' >> Calling Party Number i = 0x0080, '911' >> Plan:Unknown, Type:Unknown >> Called Party Number i = 0xA1, '2123945002' >> Plan:ISDN, Type:National >> *Jan 9 08:59:43.251: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8 callref >> = 0x8084 >> Channel ID i = 0xA98381 >> Exclusive, Channel 1 >> HQ-RTR(config-if)# >> *Jan 9 08:59:43.267: ISDN Se0/0/0:23 Q931: TX -> ALERTING pd = 8 callref = >> 0x8084 >> *Jan 9 08:59:44.191: ISDN Se0/0/0:23 Q931: RX <- DISCONNECT pd = 8 callref >> = 0x0084 >> Cause i = 0x8290 - Normal call clearing >> *Jan 9 08:59:44.195: ISDN Se0/0/0:23 Q931: TX -> RELEASE pd = 8 callref = >> 0x8084 >> *Jan 9 08:59:44.207: ISDN Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8 >> callref = 0x0084 >> HQ-RTR(config-if)# >> >> >> >> >> >> >> HQ-RTR(config-if)#do sh isdn status >> Global ISDN Switchtype = primary-ni >> ISDN Serial0/0/0:23 interface >> dsl 0, interface ISDN Switchtype = primary-ni >> Layer 1 Status: >> ACTIVE >> Layer 2 Status: >> TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED >> Layer 3 Status: >> 0 Active Layer 3 Call(s) >> Active dsl 0 CCBs = 0 >> The Free Channel Mask: 0x80000007 >> Number of L2 Discards = 0, L2 Session ID = 1 >> Total Allocated ISDN CCBs = 0 >> HQ-RTR(config-if)# >> >> >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
