Hi Guys,
no the HQ is H323 otherwise I would not change the ISDN bchan order in
the IOS but rather in the CUCM interface.
the ISDN status shows Multi Frame Establish, all is all right. I can
have incoming calls to the HQ but not outgoing calls to the Local and LD
route pattern.
From what I remember, International calls are working great :(
Next time I'll debug Q931 with detail enabled
Thanks for the help :)
Nic
Le 1/9/2013 11:41 AM, Bill a écrit :
So is you hq a mgcp? If so it looks like you are missing your isdn bind-l3 ccm
command
Is it h323 or maybe stand alone cme with just a plan pri?
If h323 the does it show status in gateways? Does it show unknown unknown
instead of unknown and ip?
Try to give us more and clearer information because right now all we know is
pri, but most likely hq is a gateway for CUCM and we don't know what type. We
don't know if this is your lab, rack rental or real world. It is very helpful
to have this information to be able to give you help.
Bill
On Jan 9, 2013, at 3:38 AM, Heath Williams <heath...@gmail.com> wrote:
Hi,
I had a similar issue on a production network from a cm to cme on net.
Look at your dial-peers and also your class codec applied to them.
Also try using the ccapi inout and the asn 245 debugs to fault find.
Hope this helps.
Sent from my iPhone
On 09/01/2013, at 8:03 PM, Nicolas MICHEL <mcl.nico...@gmail.com> wrote:
Hey Guys !
I feel like I am doomed :D
When I am calling 911/9911 from HQ, the calls fails.
It makes the PSTN phones ring and then it automagically disconnect the call.
ISDN Q931 debugs says that the requested circuit is not available, I have tried
isdn bchan ascending and descending order but with NO luck :(
The problem is that the incoming calls from the PSTN on both channel (1 and 3
=> Fractionnal PRI) are working properly :D
If anyone has an idea I would be glad to hear it :D
Thanks !!
Nic !!
HQ-RTR#
HQ-RTR#
HQ-RTR#
HQ-RTR#
*Jan 9 08:58:55.739: ISDN Se0/0/0:23 Q931: pak_private_number: Invalid
type/plan 0x0 0x0 may be overriden; sw-type 13
*Jan 9 08:58:55.743: ISDN Se0/0/0:23 Q931: Applying typeplan for sw-type 0xD
is 0x2 0x1, Calling num 2123945002
*Jan 9 08:58:55.743: ISDN Se0/0/0:23 Q931: Applying typeplan for sw-type 0xD
is 0x0 0x0, Called num 911
*Jan 9 08:58:55.743: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref = 0x0081
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98383
Exclusive, Channel 3
Calling Party Number i = 0x2181, '2123945002'
Plan:ISDN, Type:National
Called Party Number i = 0x80, '911'
Plan:Unknown, Type:Unknown
*Jan 9 08:58:55.775: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8 callref =
0x8081
Channel ID i = 0xA98383
Exclusive, Channel 3
*Jan 9 08:58:55.787: ISDN Se0/0/0:23 Q931: RX <- ALERTING pd = 8 callref =
0x8081
Pro
HQ-RTR#gress Ind i = 0x8188 - In-band info or appropriate now available
*Jan 9 08:58:55.831: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 callref =
0x0081
Cause i = 0x80AC - Requested circuit/channel not available
*Jan 9 08:58:55.843: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref =
0x8081
*Jan 9 08:58:55.847: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref
= 0x0081
HQ-RTR#
HQ-RTR#
HQ-RTR#
HQ-RTR#config t
Enter configuration commands, one per line. End with CNTL/Z.
HQ-RTR(config)#int s0/0/0:23
HQ-RTR(config-if)#isdn bchan as
HQ-RTR(config-if)#
*Jan 9 08:59:26.131: ISDN Se0/0/0:23 Q931: pak_private_number: Invalid
type/plan 0x0 0x0 may be overriden; sw-type 13
*Jan 9 08:59:26.131: ISDN Se0/0/0:23 Q931: Applying typeplan for sw-type 0xD
is 0x2 0x1, Calling num 2123945002
*Jan 9 08:59:26.131: ISDN Se0/0/0:23 Q931: Applying typeplan for sw-type 0xD
is 0x0 0x0, Called num 911
*Jan 9 08:59:26.135: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref = 0x0082
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Calling Party Number i = 0x2181, '2123945002'
Plan:ISDN, Type:National
Called Party Number i = 0x80, '911'
Plan:Unknown, Type:Unknown
*Jan 9 08:59:26.171: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8 callref =
0x8082
Channel ID i = 0xA98381
Exclusive, Channel 1
*Jan 9 08:59:26.179: ISDN Se0/0/0:23 Q931: RX <- ALERTING pd = 8 callref =
0x8082
Pro
HQ-RTR(config-gress Ind i = 0x8188 - In-band info or appropriate now available
*Jan 9 08:59:26.223: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 callref =
0x0082
Cause i = 0x80AC - Requested circuit/channel not available
*Jan 9 08:59:26.231: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref =
0x8082
*Jan 9 08:59:26.235: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref
= 0x0082if)#
HQ-RTR(config-if)#
*Jan 9 08:59:43.227: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref = 0x0084
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Progress Ind i = 0x8583 - Origination address is non-ISDN
Display i = 'Emergency Services'
Calling Party Number i = 0x0080, '911'
Plan:Unknown, Type:Unknown
Called Party Number i = 0xA1, '2123945002'
Plan:ISDN, Type:National
*Jan 9 08:59:43.251: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8 callref =
0x8084
Channel ID i = 0xA98381
Exclusive, Channel 1
HQ-RTR(config-if)#
*Jan 9 08:59:43.267: ISDN Se0/0/0:23 Q931: TX -> ALERTING pd = 8 callref =
0x8084
*Jan 9 08:59:44.191: ISDN Se0/0/0:23 Q931: RX <- DISCONNECT pd = 8 callref =
0x0084
Cause i = 0x8290 - Normal call clearing
*Jan 9 08:59:44.195: ISDN Se0/0/0:23 Q931: TX -> RELEASE pd = 8 callref =
0x8084
*Jan 9 08:59:44.207: ISDN Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8 callref
= 0x0084
HQ-RTR(config-if)#
HQ-RTR(config-if)#do sh isdn status
Global ISDN Switchtype = primary-ni
ISDN Serial0/0/0:23 interface
dsl 0, interface ISDN Switchtype = primary-ni
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0x80000007
Number of L2 Discards = 0, L2 Session ID = 1
Total Allocated ISDN CCBs = 0
HQ-RTR(config-if)#
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
