I am sorry the below dial-peers should be : dial-peer voice 2 voip destination-pattern 12341....$ session target ipv4:Sub_IP_Address codec g711ulaw dtmf-relay h245-alphanumaric h245-siganal cisco no vad
dial-peer voice 3 voip destination-pattern 12341....$ session target ipv4:Pub_IP_Address codec g711ulaw dtmf-relay h245-alphanumaric h245-siganal cisco no vad On Sat, Mar 9, 2013 at 11:14 PM, CCIEing <aboaz...@gmail.com> wrote: > Hi All, > > For site B let us say that the lab ask us to configure it as H323 gateway, > and the question mentioned that call have to go to SUB CUCM then to PUB, > in that case we have to create the 2 voip dial peers pointing to sub and > PUB as below : > > My question here , in order to make sure the preference of the 1st dial > peer , do we have to hard coded the preference command in the dial-peers or > the tag index of the dial peer will grantee that the sup dial peer will > chosen 1st as it is tag is less than the pub dial-peer > > Thanks > > dial-peer voice 2 voip > destination-pattern 12341....$ > session target ipv4:Sub_IP_Address > codec g711ulaw > dtmf-relay h245-alphanumaric h245-siganal cisco > no vad > > dial-peer voice 2 voip > destination-pattern 12341....$ > session target ipv4:Sub_IP_Address > codec g711ulaw > dtmf-relay h245-alphanumaric h245-siganal cisco > no vad >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com