Hi, Thanks all, Got it
On Sun, Mar 10, 2013 at 12:01 AM, Amp <amccar...@cciequest.com> wrote: > Hey, > I would hard code the preferences. Being that the default preference in > canonical terms is 0, you could set the preference on the pub dial peer to > preference 1, or you could set the sub dial-peer to preference 1 and the > pub to preference 2. Either way, I would hard code it. > > Amp > > > > Quoting CCIEing <aboaz...@gmail.com>: > > I am sorry the below dial-peers should be : >> dial-peer voice 2 voip >> destination-pattern 12341....$ >> session target ipv4:Sub_IP_Address >> codec g711ulaw >> dtmf-relay h245-alphanumaric h245-siganal cisco >> no vad >> >> dial-peer voice 3 voip >> destination-pattern 12341....$ >> session target ipv4:Pub_IP_Address >> codec g711ulaw >> dtmf-relay h245-alphanumaric h245-siganal cisco >> no vad >> >> >> On Sat, Mar 9, 2013 at 11:14 PM, CCIEing <aboaz...@gmail.com> wrote: >> >> Hi All, >>> >>> For site B let us say that the lab ask us to configure it as H323 >>> gateway, >>> and the question mentioned that call have to go to SUB CUCM then to PUB, >>> in that case we have to create the 2 voip dial peers pointing to sub and >>> PUB as below : >>> >>> My question here , in order to make sure the preference of the 1st dial >>> peer , do we have to hard coded the preference command in the dial-peers >>> or >>> the tag index of the dial peer will grantee that the sup dial peer will >>> chosen 1st as it is tag is less than the pub dial-peer >>> >>> Thanks >>> >>> dial-peer voice 2 voip >>> destination-pattern 12341....$ >>> session target ipv4:Sub_IP_Address >>> codec g711ulaw >>> dtmf-relay h245-alphanumaric h245-siganal cisco >>> no vad >>> >>> dial-peer voice 2 voip >>> destination-pattern 12341....$ >>> session target ipv4:Sub_IP_Address >>> codec g711ulaw >>> dtmf-relay h245-alphanumaric h245-siganal cisco >>> no vad >>> >>> >> > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com