Hi Ivan This is phone firmware bug, i also have the same issue for my SB, when i put it in fallback mode it goes in fall back mode but wont show DN, work around is you have to move back to older version of phone firmware
You have to downlaod this version of phone firmware SCCP41.8-5-4S.loads Regards F On Sun, Mar 24, 2013 at 6:35 PM, <ccie_voice-requ...@onlinestudylist.com>wrote: > Send CCIE_Voice mailing list submissions to > ccie_voice@onlinestudylist.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://onlinestudylist.com/mailman/listinfo/ccie_voice > or, via email, send a message with subject or body 'help' to > ccie_voice-requ...@onlinestudylist.com > > You can reach the person managing the list at > ccie_voice-ow...@onlinestudylist.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of CCIE_Voice digest..." > > > Today's Topics: > > 1. CME-SRST (Ivan Dar?o S?nchez Calder?n) > 2. Re: CME-SRST (Leslie Meade) > 3. Re: CME-SRST (Steve Keller) > 4. Re: CME-SRST (Ivan Dar?o S?nchez Calder?n) > 5. Re: Outgoing Calls via T1 failed (CCIEing) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 24 Mar 2013 16:50:04 -0500 > From: Ivan Dar?o S?nchez Calder?n <ids.calde...@gmail.com> > To: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] CME-SRST > Message-ID: > <CAMJQQQ= > 7mrfcpd0dcjwcqkmwkhujk7py4zgwyohxm-iby9s...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Hi, > > When I configure CME-SRST and I apply an ephone-template to a phone, I > reset the phone and when the pone comes back there is no line on the phone, > I check the configuration and everithing is fine , the button is associated > with the phone, this is a bug? someone knows what is the workaround? > > Thanks > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > </archives/ccie_voice/attachments/20130324/b6b27bdb/attachment-0001.html> > > ------------------------------ > > Message: 2 > Date: Sun, 24 Mar 2013 22:01:58 +0000 > From: Leslie Meade <leslie.me...@lvs1.com> > To: Ivan Dar?o S?nchez Calder?n <ids.calde...@gmail.com>, > "ccie_voice@onlinestudylist.com" < > ccie_voice@onlinestudylist.com> > Subject: Re: [OSL | CCIE_Voice] CME-SRST > Message-ID: > < > f64719604b4e6f41bdbb2af38e7609f449a95...@lvscgyex03.longviewsystems.com> > > Content-Type: text/plain; charset="iso-8859-1" > > Have you got a type > > Ephone 1 > Mac address XXXX.XXXX.XXXX > Type 7965 > > Leslie Meade > > > .................................................................. > Mobile:778.228.4339 | Main: 604.676.5239 > Email: leslie.me...@lvs1.com<mailto:leslie.me...@lvs1.com> > > From: ccie_voice-boun...@onlinestudylist.com [mailto: > ccie_voice-boun...@onlinestudylist.com] On Behalf Of Ivan Dar?o S?nchez > Calder?n > Sent: Sunday, March 24, 2013 2:50 PM > To: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] CME-SRST > > Hi, > > When I configure CME-SRST and I apply an ephone-template to a phone, I > reset the phone and when the pone comes back there is no line on the phone, > I check the configuration and everithing is fine , the button is associated > with the phone, this is a bug? someone knows what is the workaround? > > Thanks > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > </archives/ccie_voice/attachments/20130324/67ca29df/attachment-0001.html> > > ------------------------------ > > Message: 3 > Date: Sun, 24 Mar 2013 18:07:51 -0400 > From: Steve Keller <skeller...@gmail.com> > To: Ivan Dar?o S?nchez Calder?n <ids.calde...@gmail.com> > Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> > Subject: Re: [OSL | CCIE_Voice] CME-SRST > Message-ID: > < > cacxam7pckaw86zjgjdd6kt4prfzu8rcrwdox887eu5sz9of...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Bug you do not want to reset phones in SRST mode. It is for this reason > that it would be recommended to test your SRST early in the lab , write > mem, reload and not do SRST again. > > CME as SRST was new in these releases and is known to be very buggy. > > On Sunday, March 24, 2013, Ivan Dar?o S?nchez Calder?n wrote: > > > Hi, > > > > When I configure CME-SRST and I apply an ephone-template to a phone, I > > reset the phone and when the pone comes back there is no line on the > phone, > > I check the configuration and everithing is fine , the button is > associated > > with the phone, this is a bug? someone knows what is the workaround? > > > > Thanks > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > </archives/ccie_voice/attachments/20130324/e69c0a96/attachment-0001.html> > > ------------------------------ > > Message: 4 > Date: Sun, 24 Mar 2013 17:25:17 -0500 > From: Ivan Dar?o S?nchez Calder?n <ids.calde...@gmail.com> > To: Steve Keller <skeller...@gmail.com>, leslie.me...@lvs1.com > Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> > Subject: Re: [OSL | CCIE_Voice] CME-SRST > Message-ID: > < > camjqqqncbpfhzfpxsksc7-3ijxifqe6pvsah4et3j+pdhte...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Hi, thanks for your help > > yes I have the type on the ephone, the way that I found to fix the problem > is copyin the configuraton on notepad, removing the telephony-service and > putting back again the configuration in the router, the line appears again > on the phone and the ephone template takes effect. > > 2013/3/24 Steve Keller <skeller...@gmail.com> > > > > > Bug you do not want to reset phones in SRST mode. It is for this reason > > that it would be recommended to test your SRST early in the lab , write > > mem, reload and not do SRST again. > > > > CME as SRST was new in these releases and is known to be very buggy. > > > > On Sunday, March 24, 2013, Ivan Dar?o S?nchez Calder?n wrote: > > > >> Hi, > >> > >> When I configure CME-SRST and I apply an ephone-template to a phone, I > >> reset the phone and when the pone comes back there is no line on the > phone, > >> I check the configuration and everithing is fine , the button is > associated > >> with the phone, this is a bug? someone knows what is the workaround? > >> > >> Thanks > >> > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > </archives/ccie_voice/attachments/20130324/8f7fd1d7/attachment-0001.html> > > ------------------------------ > > Message: 5 > Date: Mon, 25 Mar 2013 01:35:23 +0300 > From: CCIEing <aboaz...@gmail.com> > To: ikizoo4 kwon <ikiz...@hotmail.com> > Cc: ccie_voice@onlinestudylist.com > Subject: Re: [OSL | CCIE_Voice] Outgoing Calls via T1 failed > Message-ID: > < > caehpkk+rkt6dq7ezt1ndkaqpzrthteapvwc_8s6yzuid+bz...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Hi, > > Changing the selection to top down solve the issue :) > > thanks > > On Sat, Mar 23, 2013 at 2:27 AM, ikizoo4 kwon <ikiz...@hotmail.com> wrote: > > > use Topdwon for channel selection order in GW > > > > ------------------------------ > > Date: Sat, 23 Mar 2013 00:52:10 +0300 > > From: aboaz...@gmail.com > > To: ccie_voice@onlinestudylist.com > > Subject: [OSL | CCIE_Voice] Outgoing Calls via T1 failed > > > > > > Hi all, > > > > After configuring my HQ GW as MGCP, then configure my T1 to register with > > cucm , I was govern by the lack of the DSP resources, which force me to > > define only 16 channel out of the 23 on my pri-group under the T1 > > controller configuration !! > > > > here is the config : > > > > controller T1 0/0/0 > > pri-group timeslots 1-16 service mgcp > > > > Then I faced a problem with my outgoing calls , the calls was dropping > due > > to the cause "*Requested circuit/channel not available*" > > > > My Question here, as there is 16 channel in my Pri-group are > > already configured, why all calls get dropped with cause of > > non availability of the resources, Why not to use one of the available > > channels (1-16) > > > > Appreciate your help > > > > here is below the output of debug q931 for one of my outgoing calls: > > > > > > > > *SDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref = 0x000F * > > * Bearer Capability i = 0x8090A2 * > > * Standard = CCITT * > > * Transfer Capability = Speech * > > * Transfer Mode = Circuit * > > * Transfer Rate = 64 kbit/s * > > * Channel ID i = 0xA98390 * > > * Exclusive, Channel 16 * > > * Display i = 'HQ PH1' * > > * Calling Party Number i = 0x2181, '7772022001' * > > * Plan:ISDN, Type:National * > > * Called Party Number i = 0x81, '911' * > > * Plan:ISDN, Type:Unknown* > > *ISDN Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x800F * > > * Cause i = 0x82AC1810 - Requested circuit/channel not available* > > > > > > _______________________________________________ For more information > > regarding industry leading CCIE Lab training, please visit > > www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out > > www.PlatinumPlacement.com > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: </archives/ccie_voice/attachments/20130325/54e5c4f5/attachment.html> > > ------------------------------ > > _______________________________________________ > CCIE_Voice mailing list > CCIE_Voice@onlinestudylist.com > http://onlinestudylist.com/mailman/listinfo/ccie_voice > > > End of CCIE_Voice Digest, Vol 85, Issue 89 > ****************************************** > -- *Faiz Bashir* CCNA, CCVP, CCNP (Voice) TelePresence Installation & Solution Specialist ** M:+1 647-291-2243
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
