I don't have a the link to it but I read about it in this OSL.
Date: Mon, 8 Apr 2013 19:47:35 +0545
Subject: Re: [OSL | CCIE_Voice] CME -> GK -> UCM bandwidth
From: bring...@gmail.com
To: mgaz...@hotmail.com
CC: ccie_voice@onlinestudylist.com
Will check and let you know.
BTW you mentioned "a known bug" can you please post a link of it?
Thanks.
On Mon, Apr 8, 2013 at 7:41 PM, Mohamed Gazzaz <mgaz...@hotmail.com> wrote:
Hi Suresh,
I think you are hitting a known bug . Please go to service parameters --> call
manager and change the following to G729
Intraregion Audio Codec Default: G729
Regards,Mohamed Gazzaz
Date: Mon, 8 Apr 2013 19:02:14 +0545
From: bring...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] CME -> GK -> UCM bandwidth
Hello Experts!
I have HQ as the GK and CME, CUCM publisher and subscriber are registered to GK
in single zone. Further, GK Trunk is in separate region/DP with hard-coded
G.729 codec with other regions/itself as well.
When I call from HQ to CME side, and check "sh gatek call" it shows that the
call is consuming 16K bandwidth, which is expected.
The dial-peer to CME has g729r8 as codec (the default one).
Even then, the same command displays that the bandwidth consumed is 128K.
Any thoughts on what probably I missed?
--
Suresh Bhandari
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
--
Suresh Bhandari
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
