Hi Ryan,
This is because SCCP phones process dialed numbers in real time digit by digit
as you dial whereas Type-A SIP phones send digits when you press # or Dial
softkey. There are 2 methods to simulate SIP phones; either using phone models
that support KPML or configure SIP dial plans on UCM/UCME. 7965 doesn't support
KPML. So, you need to configure SIP dial plans.
Thanks,
Ramy
--- Original Message ---
From: "Ryan Maxam" <ryan.ma...@gmail.com>
Sent: April 27, 2013 6:58 PM
To: "Online Study (ccie_voice@onlinestudylist.com)"
<ccie_voice@onlinestudylist.com>
Subject: [OSL | CCIE_Voice] Blocking 91900 pattern
Hello All,
I am working on WB1 lab 5.6. I have a 91900 RP that is blocked and
annunciator set to "precedence level exceeded"
Problem is when I call 919004522138 from br1 ph 2 (SCCP) I can hear
the annunciatot after I dial the 5th digit, but when I call it from hq
ph 2 (SIP) my call gets dropped after i dial the 5th digit without
hearing the annunciator. (all other calls are working fom hq ph2)
I am using all hardware phones (7965)
Any thoughts? Thanks for your help
Ryan
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com