You might also need to match the softkeys on the phones in SRST to those when registered to CUCM
On Sat, Jun 22, 2013 at 4:52 AM, Somphol Boonjing <somp...@gmail.com> wrote: > To add to the list: > > - music-on-hold matching that of CUCM if applicable (i.e. in a situation > where the file is provided) > - secondary-dialtone > - Alert Name & Connected Name (i.e. ephone-dn's name parameter) (esp. > intra-site) > - CFUR settings for relevant DN on CUCM (To what extent this is relevant > to SRST point, I don't know, but I think I will need to clarify this with > the proctor if it is not clearly stated.) > > I've also tested that the following is not possible in SRST as the phone > will still try to retrieve the file from the original TFTP server. > > - (not possible) matching Ringlist.xml / DistinctiveRingList.xml to that > of CUCM > > > > --Somphol > > > On Sat, Jun 22, 2013 at 9:20 AM, Ovidiu Popa <ovi.p...@gmail.com> wrote: > >> Follow-up: >> >> voice service voip >> h323 >> call preserve >> >> Ovidiu >> >> On Fri, Jun 21, 2013 at 10:40 PM, Ovidiu Popa <ovi.p...@gmail.com> wrote: >> >>> Adding one more for H323 gateways: >>> >>> *CUCM service Parameter : Allow Peer to Preserve H.323 Calls* >>> * >>> * >>> Keep it coming guys and gals >>> >>> Regards, >>> Ovidiu >>> >>> >>> On Fri, Jun 21, 2013 at 11:55 AM, Somphol Boonjing <somp...@gmail.com>wrote: >>> >>>> To add to your list that is already good, >>>> >>>> - date/time format >>>> - timezone >>>> - system message >>>> - number of max calls & busy call triggers >>>> - call pickup behavior if applicable (directed vs no directed call >>>> pickup) >>>> - call-transfer pattern >>>> - call-forward pattern >>>> - number of channels for ephone (dual, octal) >>>> - cbarge for shared line if applicable >>>> - SRST for media resources (via sdspfarm) >>>> - cptone if applicable >>>> >>>> --Somphol. >>>> >>>> >>>> --Somphol >>>> >>>> >>>> On Fri, Jun 21, 2013 at 3:08 PM, Karen Johnson < >>>> karen.johnson...@yahoo.ca> wrote: >>>> >>>>> >>>>> all, >>>>> >>>>> i am trying to compile SRST check for my next attempt. I never got >>>>> full mark here in my few attempts and always curious what i missing (even >>>>> it seems I already done what they asked) >>>>> >>>>> - caller id and name ( hide or display) >>>>> - Mwi light and VM message from PSTN and IP phone >>>>> - inter site call & VM inter site >>>>> - COR if any >>>>> - When forward call come , it play personal greeting >>>>> - DND to divert >>>>> - huntstop channel >>>>> - if agents still working >>>>> - after back to normal mode, verify everhthing >>>>> -softkeys >>>>> - feature : conference >>>>> - timeout interdigit and Cfwd timer similar to UCM mode >>>>> - always use preference 9 and "dial-peer hunt 2" >>>>> >>>>> Any other tips and trick that I am not aware ? help please >>>>> >>>>> K >>>>> >>>>> >>>>> >>>>> >>>>> - >>>>> >>>>> >>>>> _______________________________________________ >>>>> For more information regarding industry leading CCIE Lab training, >>>>> please visit www.ipexpert.com >>>>> >>>>> Are you a CCNP or CCIE and looking for a job? Check out >>>>> www.PlatinumPlacement.com >>>>> >>>> >>>> >>>> _______________________________________________ >>>> For more information regarding industry leading CCIE Lab training, >>>> please visit www.ipexpert.com >>>> >>>> Are you a CCNP or CCIE and looking for a job? Check out >>>> www.PlatinumPlacement.com >>>> >>> >>> >> > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com