Hello Ram, You can assign Hq device pool and location setting to cti route point and cti ports.. And assign site c device pool and location to site c phones...
Regards, Piyush Jain Sent from my android device. -----Original Message----- From: Ramcharan Arya <ramcharan.a...@gmail.com> To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> Sent: Tue, 09 Jul 2013 7:59 AM Subject: [OSL | CCIE_Voice] AAR and uccx Hi, I have a CTI Route point 4000 and two CTI port 410x and 410y SiteC Phone 1 and SC Phone 2 are in CSQ which is assign to application and associated with trigger. Due to RSVP when call exceed ip rsvp bandwidth call from uccx to site Phones should use AAR and to over PSTN. My doubts are . What should be local and device pool of CTI ports so it should work in AAR when PSTN caller make call to CTI route point number 4000. Can someone please advice about this. Thanks, Ramcharan Arya
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com