Ya MRGL_FS Contains MRG_FS which contains SB_Xcode and SB_MTP (G711) dspfarm profile 1 mtp associate application sccp codec g711ulaw maximum session software 4 no shut dspfarm profile 2 transcode associate application sccp codec g729r8 maximum session 2 no shut
MRGL_FS is applied to only h323 GW. It works for me But My question is can we use only transcoder , i.e MRG_FS contains only XCode not MTP ? Other part is how many session to assign in dspfarm profile On Sat, Jul 13, 2013 at 1:57 AM, Karen Johnson <karen.johnson...@yahoo.ca>wrote: > hi friend, > > may i see your IOS config for this ? > > and also what in inside MRG-SB and MRGL-SB > > you only assign MRGL SB to GW h323, right ? > > K > > *From:* myfriend myfriend <myfrnd...@gmail.com> > *To:* Karen Johnson <karen.johnson...@yahoo.ca> > *Cc:* ccie_voice@onlinestudylist.com > *Sent:* Friday, July 12, 2013 12:45:35 AM > *Subject:* Fast Start > > These are my finding > > No need to enable fast start on Router , by default it will use Fast Start > > Assgn MRGL to SB Gw which contain Only G711 MTP (and transcoder) > > Check MTP Required > Check Outbound FS > Check Inbound FS > > That it > Am i missing any thing > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com