Thank you very much Sam for that and I will try it on the weekend and I'll let you know.
Have a wonderful day, Hesham On 26 August 2013 13:26, Sam Wilson <wilsonc...@gmail.com> wrote: > > Hi > > Try entering "no service config" in the config mode, save the config and > reload the router > > Hope that help, > > Rwgards > Sent from my Windows Phone > ------------------------------ > From: Hesham Abdelkereem > Sent: 8/26/2013 1:05 AM > To: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] ACS 2509 Issues > > Dear Experts, > I have Cisco ACS 2509 using it for labs. I have suffering couple of issues > with it > First when I turn on the device i get the following > System Bootstrap, Version 11.0(10c), SOFTWARE > Copyright (c) 1986-1996 by cisco Systems > 2500 processor with 16384 Kbytes of main memory > > > > > > > > > Then I hit B to boot > then I get the following > Restricted Rights Legend > Use, duplication, or disclosure by the Government is > subject to restrictions as set forth in subparagraph > (c) of the Commercial Computer Software - Restricted > Rights clause at FAR sec. 52.227-19 and subparagraph > (c) (1) (ii) of the Rights in Technical Data and Computer > Software clause at DFARS sec. 252.227-7013. > cisco Systems, Inc. > 170 West Tasman Drive > San Jose, California 95134-1706 > Cisco Internetwork Operating System Software > IOS (tm) 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE > SOFTWARE (fc1) > Copyright (c) 1986-1996 by cisco Systems, Inc. > Compiled Fri 27-Dec-96 17:33 by loreilly > Image text-base: 0x01010000, data-base: 0x00001000 > cisco 2509 (68030) processor (revision D) with 16384K/2048K bytes of > memory. > Processor board ID 01886520, with hardware revision 00000000 > X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. > 1 Ethernet/IEEE 802.3 interface. > 2 Serial network interfaces. > 8 terminal lines. > 32K bytes of non-volatile configuration memory. > 16384K bytes of processor board System flash (Read/Write) > Loading network-confg ... [timed out] > Loading cisconet.cfg ... [timed out] > Loading acserver-confg ... [timed out] > Loading acserver.cfg ... [timed out] > Press RETURN to get started! > I always get these messages for infinity > Loading network-confg ... [timed out] > Loading cisconet.cfg ... [timed out] > Loading acserver-confg ... [timed out] > Loading acserver.cfg ... [timed out] > Then finally when I access any device connected to the ASYNC cable > I am able to connect but not unable to exit the session > I hit Ctrl + Shift + 6 + X many times by the Laptop keyboard and even by > On-Screen keyboard and still nothing is working well. > I have tried to do the following workaround > 1-I have another 2509 which has a defective ASYNC Socket , I removed all > the Memories and stuff and put it in the other one and still get the same > results. > Your help would be highly appreciated. > Thank you very much in advance, >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
