I just noticed in the trace Outside Dial Tone = NO. I have also confirmed the LD pattern is not set for off net.
Interesting that when I set to off net it does not give secondary dial tone until the 3rd digit is dialed. I just watched a video yesterday on how to change that but can't remember off the top of my head? On Jan 30, 2014 9:40 AM, "Mike O'Nan" <mdona...@gmail.com> wrote: > Here are the debugs from the MGCP GW: > > > > RTR-02#debug isdn q931 > > RTR-02#debug ccm-manager backhaul packets > > Call Manager backhaul packets debugging is on > > RTR-02# > > Jan 30 08:19:12.546: > > cmbh_rcv_callback: <-- Receiving backhaul msg for Se0/3/1:23 : > > | bk_msg_type = DATA_REQ > > | bk_chan_id (slot:port) = 0:1 > > | Q.931 length = 41 > > | Q.931 message type: SETUP > > | Q.931 message = > 0802008E0504038090A21803A98397200200F36C06218137353739700CA13132373035373732383332 > > Jan 30 08:19:12.546: ISDN Se0/3/1:23 Q931: TX -> SETUP pd = 8 callref = > 0x008E > > Bearer Capability i = 0x8090A2 > > Standard = CCITT > > Transfer Capability = Speech > > Transfer Mode = Circuit > > Transfer Rate = 64 kbit/s > > Channel ID i = 0xA98397 > > Exclusive, Channel 23 > > Net Specific Fac i = 0x00F3 > > Calling Party Number i = 0x2181, '7579' > > Plan:ISDN, Type:National > > Called Party Number i = 0xA1, '1270XXXXXXX' Characters hidden > > Plan:ISDN, Type:National > > Jan 30 08:19:12.578: ISDN Se0/3/1:23 Q931: RX <- STATUS pd = 8 callref = > 0x808E > > Cause i = 0x82E4 - Invalid information element contents > > Call State i = 0x01 > > Jan 30 08:19:12.578: > > cmbrl_send_pak: --> Sending backhauled msg for Se0/3/1:23 : > > | bk_msg_type = DATA_IND > > | bk_chan_id (slot:port) = 0:1 > > | Q.931 length = 12 > > | Q.931 message type: STATUS > > | Q.931 message = 0802808E7D080282E4140101 > > Jan 30 08:19:12.638: ISDN Se0/3/1:23 Q931: RX <- RELEASE_COMP pd = 8 > callref = 0x808E > > Cause i = 0x8295 - Call rejected > > Jan 30 08:19:12.638: > > cmbrl_send_pak: --> Sending backhauled msg for Se0/3/1:23 : > > | bk_msg_type = DATA_IND > > | bk_chan_id (slot:port) = 0:1 > > | Q.931 length = 9 > > | Q.931 message type: RELEASE COMPLETE > > | Q.931 message = 0802808E5A08028295 > > Jan 30 08:19:27.486: > > cmbh_rcv_callback: <-- Receiving backhaul msg for Se0/3/1:23 : > > | bk_msg_type = DATA_REQ > > | bk_chan_id (slot:port) = 0:1 > > | Q.931 length = 41 > > | Q.931 message type: SETUP > > | Q.931 message = > 0802008F0504038090A21803A98397200200F36C06218137353834700CA13138313232353038343038 > > Jan 30 08:19:27.490: ISDN Se0/3/1:23 Q931: TX -> SETUP pd = 8 callref = > 0x008F > > Bearer Capability i = 0x8090A2 > > Standard = CCITT > > Transfer Capability = Speech > > Transfer Mode = Circuit > > Transfer Rate = 64 kbit/s > > Channel ID i = 0xA98397 > > Exclusive, Channel 23 > > Net Specific Fac i = 0x00F3 > > Calling Party Number i = 0x2181, '7584' > > Plan:ISDN, Type:National > > Called Party Number i = 0xA1, '1812XXXXXXX' Characters hidden > > Plan:ISDN, Type:National > > Jan 30 08:19:27.518: ISDN Se0/3/1:23 Q931: RX <- STATUS pd = 8 callref = > 0x808F > > Cause i = 0x82E4 - Invalid information element contents > > Call State i = 0x01 > > Jan 30 08:19:27.518: > > cmbrl_send_pak: --> Sending backhauled msg for Se0/3/1:23 : > > | bk_msg_type = DATA_IND > > | bk_chan_id (slot:port) = 0:1 > > | Q.931 length = 12 > > | Q.931 message type: STATUS > > | Q.931 message = 0802808F7D080282E4140101 > > Jan 30 08:19:27.574: ISDN Se0/3/1:23 Q931: RX <- RELEASE_COMP pd = 8 > callref = 0x808F > > Cause i = 0x8295 - Call rejected > > Jan 30 08:19:27.574: > > cmbrl_send_pak: --> Sending backhauled msg for Se0/3/1:23 : > > | bk_msg_type = DATA_IND > > | bk_chan_id (slot:port) = 0:1 > > | Q.931 length = 9 > > | Q.931 message type: RELEASE COMPLETE > > | Q.931 message = 0802808F5A08028295 > > > > > > DNA from CUCM: > > > > Results Summary > > Calling Party Information > > Calling Party = 610XXXXXXX Characters hidden > > Partition = Internal > > Device CSS = SiteLD-CSS > > Line CSS = SiteLD-CSS > > AAR Group Name = > > AAR CSS = > > Dialed Digits = 91270XXXXXXX Characters hidden > > Match Result = RouteThisPattern > > Matched Pattern Information > > Pattern = 9.1[2-9]XX[2-9]XXXXXX > > Partition = LD-Site > > Time Schedule = > > Called Party Number = 1270XXXXXXX Characters hidden > > Time Zone = America/New_York > > End Device = Site-RL > > Call Classification = OffNet > > InterDigit Timeout = NO > > Device Override = Disabled > > Outside Dial Tone = NO > > Call Flow > > TranslationPattern :Pattern= > > Partition = > > Positional Match List = 1270XXXXXXX Characters hidden > > Calling Party Number = 610XXXXXXX Characters hidden > > PreTransform Calling Party Number = > > PreTransform Called Party Number = > > Calling Party Transformations > > External Phone Number Mask = NO > > Calling Party Mask = > > Prefix = > > CallingLineId Presentation = > > CallingName Presentation = > > Calling Party Number = 610XXXXXXX Characters hidden > > ConnectedParty Transformations > > ConnectedLineId Presentation = > > ConnectedName Presentation = > > Called Party Transformations > > Called Party Mask = > > Discard Digits Instruction = > > Prefix = > > Called Number = > > Route Pattern :Pattern= 9.1[2-9]XX[2-9]XXXXXX > > Positional Match List = 1270XXXXXXX Characters hidden > > DialPlan = > > Route Filter > > Filter Name = > > Filter Clause = > > Require Forced Authorization Code = No > > Authorization Level = 0 > > Require Client Matter Code = No > > Call Classification = > > PreTransform Calling Party Number = 7579 > > PreTransform Called Party Number = 91270XXXXXXX Characters > hidden > > Calling Party Transformations > > External Phone Number Mask = YES > > Calling Party Mask = > > Prefix = > > CallingLineId Presentation = Allowed > > CallingName Presentation = Default > > Calling Party Number = 610XXXXXXX Characters hidden > > ConnectedParty Transformations > > ConnectedLineId Presentation = Default > > ConnectedName Presentation = Default > > Called Party Transformations > > Called Party Mask = > > Discard Digits Instruction = PreDot > > Prefix = > > Called Number = 1270XXXXXXX Characters hidden > > Route List :Route List Name= Site-RL > > RouteGroup :RouteGroup Name= Site_Route_Group > > PreTransform Calling Party Number = 7579 > > PreTransform Called Party Number = 91270XXXXXXX Characters > hidden > > Calling Party Transformations > > External Phone Number Mask = On > > Calling Party Mask = > > Prefix = > > Calling Party Number = > > Called Party Transformations > > Called Party Mask = > > Discard Digits Instructions = PreDot > > Prefix = > > Called Number = > > Device :Type= MGCPT1PRIPort > > End Device Name = S0/SU3/ds...@rtr-02.xxxxx.com > > PortNumber = 0 > > Device Status = Registered > > AAR Group Name = > > AAR Calling Search Space = > > AAR Prefix Digits = > > Call Classification = > > Calling Party Selection = > > CallingLinePresentation = > > ConnectedLinePresentation = > > Number Of Strip Digits = > > CallerID DN = > > > On Thu, Jan 30, 2014 at 8:52 AM, Moataz Tolba <moataz_m...@yahoo.com>wrote: > >> Check if the route list get exhausted and need a rest >> >> Do you have traces for the failing call ? >> >> Moataz >> >> -----Original Message----- >> From: Mike O'Nan <mdona...@gmail.com> >> Sender: ccie_voice-boun...@onlinestudylist.com >> Date: Thu, 30 Jan 2014 08:29:46 >> To: <ccie_voice@onlinestudylist.com> >> Subject: [OSL | CCIE_Voice] 2nd LD call fails >> >> _______________________________________________ >> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: >> >> iPexpert on YouTube: www.youtube.com/ipexpertinc >> > >
_______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
