Pattern is set off net and I fixed the secondary dial tone...still get reorder tone on 2nd LD call. Any ideas from the debugs I provided? On Jan 30, 2014 9:45 AM, "Mike O'Nan" <mdona...@gmail.com> wrote:
> I just noticed in the trace Outside Dial Tone = NO. I have also confirmed > the LD pattern is not set for off net. > > Interesting that when I set to off net it does not give secondary dial > tone until the 3rd digit is dialed. I just watched a video yesterday on how > to change that but can't remember off the top of my head? > On Jan 30, 2014 9:40 AM, "Mike O'Nan" <mdona...@gmail.com> wrote: > >> Here are the debugs from the MGCP GW: >> >> >> >> RTR-02#debug isdn q931 >> >> RTR-02#debug ccm-manager backhaul packets >> >> Call Manager backhaul packets debugging is on >> >> RTR-02# >> >> Jan 30 08:19:12.546: >> >> cmbh_rcv_callback: <-- Receiving backhaul msg for Se0/3/1:23 : >> >> | bk_msg_type = DATA_REQ >> >> | bk_chan_id (slot:port) = 0:1 >> >> | Q.931 length = 41 >> >> | Q.931 message type: SETUP >> >> | Q.931 message = >> 0802008E0504038090A21803A98397200200F36C06218137353739700CA13132373035373732383332 >> >> Jan 30 08:19:12.546: ISDN Se0/3/1:23 Q931: TX -> SETUP pd = 8 callref = >> 0x008E >> >> Bearer Capability i = 0x8090A2 >> >> Standard = CCITT >> >> Transfer Capability = Speech >> >> Transfer Mode = Circuit >> >> Transfer Rate = 64 kbit/s >> >> Channel ID i = 0xA98397 >> >> Exclusive, Channel 23 >> >> Net Specific Fac i = 0x00F3 >> >> Calling Party Number i = 0x2181, '7579' >> >> Plan:ISDN, Type:National >> >> Called Party Number i = 0xA1, '1270XXXXXXX' Characters hidden >> >> Plan:ISDN, Type:National >> >> Jan 30 08:19:12.578: ISDN Se0/3/1:23 Q931: RX <- STATUS pd = 8 callref = >> 0x808E >> >> Cause i = 0x82E4 - Invalid information element contents >> >> Call State i = 0x01 >> >> Jan 30 08:19:12.578: >> >> cmbrl_send_pak: --> Sending backhauled msg for Se0/3/1:23 : >> >> | bk_msg_type = DATA_IND >> >> | bk_chan_id (slot:port) = 0:1 >> >> | Q.931 length = 12 >> >> | Q.931 message type: STATUS >> >> | Q.931 message = 0802808E7D080282E4140101 >> >> Jan 30 08:19:12.638: ISDN Se0/3/1:23 Q931: RX <- RELEASE_COMP pd = 8 >> callref = 0x808E >> >> Cause i = 0x8295 - Call rejected >> >> Jan 30 08:19:12.638: >> >> cmbrl_send_pak: --> Sending backhauled msg for Se0/3/1:23 : >> >> | bk_msg_type = DATA_IND >> >> | bk_chan_id (slot:port) = 0:1 >> >> | Q.931 length = 9 >> >> | Q.931 message type: RELEASE COMPLETE >> >> | Q.931 message = 0802808E5A08028295 >> >> Jan 30 08:19:27.486: >> >> cmbh_rcv_callback: <-- Receiving backhaul msg for Se0/3/1:23 : >> >> | bk_msg_type = DATA_REQ >> >> | bk_chan_id (slot:port) = 0:1 >> >> | Q.931 length = 41 >> >> | Q.931 message type: SETUP >> >> | Q.931 message = >> 0802008F0504038090A21803A98397200200F36C06218137353834700CA13138313232353038343038 >> >> Jan 30 08:19:27.490: ISDN Se0/3/1:23 Q931: TX -> SETUP pd = 8 callref = >> 0x008F >> >> Bearer Capability i = 0x8090A2 >> >> Standard = CCITT >> >> Transfer Capability = Speech >> >> Transfer Mode = Circuit >> >> Transfer Rate = 64 kbit/s >> >> Channel ID i = 0xA98397 >> >> Exclusive, Channel 23 >> >> Net Specific Fac i = 0x00F3 >> >> Calling Party Number i = 0x2181, '7584' >> >> Plan:ISDN, Type:National >> >> Called Party Number i = 0xA1, '1812XXXXXXX' Characters hidden >> >> Plan:ISDN, Type:National >> >> Jan 30 08:19:27.518: ISDN Se0/3/1:23 Q931: RX <- STATUS pd = 8 callref = >> 0x808F >> >> Cause i = 0x82E4 - Invalid information element contents >> >> Call State i = 0x01 >> >> Jan 30 08:19:27.518: >> >> cmbrl_send_pak: --> Sending backhauled msg for Se0/3/1:23 : >> >> | bk_msg_type = DATA_IND >> >> | bk_chan_id (slot:port) = 0:1 >> >> | Q.931 length = 12 >> >> | Q.931 message type: STATUS >> >> | Q.931 message = 0802808F7D080282E4140101 >> >> Jan 30 08:19:27.574: ISDN Se0/3/1:23 Q931: RX <- RELEASE_COMP pd = 8 >> callref = 0x808F >> >> Cause i = 0x8295 - Call rejected >> >> Jan 30 08:19:27.574: >> >> cmbrl_send_pak: --> Sending backhauled msg for Se0/3/1:23 : >> >> | bk_msg_type = DATA_IND >> >> | bk_chan_id (slot:port) = 0:1 >> >> | Q.931 length = 9 >> >> | Q.931 message type: RELEASE COMPLETE >> >> | Q.931 message = 0802808F5A08028295 >> >> >> >> >> >> DNA from CUCM: >> >> >> >> Results Summary >> >> Calling Party Information >> >> Calling Party = 610XXXXXXX Characters hidden >> >> Partition = Internal >> >> Device CSS = SiteLD-CSS >> >> Line CSS = SiteLD-CSS >> >> AAR Group Name = >> >> AAR CSS = >> >> Dialed Digits = 91270XXXXXXX Characters hidden >> >> Match Result = RouteThisPattern >> >> Matched Pattern Information >> >> Pattern = 9.1[2-9]XX[2-9]XXXXXX >> >> Partition = LD-Site >> >> Time Schedule = >> >> Called Party Number = 1270XXXXXXX Characters hidden >> >> Time Zone = America/New_York >> >> End Device = Site-RL >> >> Call Classification = OffNet >> >> InterDigit Timeout = NO >> >> Device Override = Disabled >> >> Outside Dial Tone = NO >> >> Call Flow >> >> TranslationPattern :Pattern= >> >> Partition = >> >> Positional Match List = 1270XXXXXXX Characters hidden >> >> Calling Party Number = 610XXXXXXX Characters hidden >> >> PreTransform Calling Party Number = >> >> PreTransform Called Party Number = >> >> Calling Party Transformations >> >> External Phone Number Mask = NO >> >> Calling Party Mask = >> >> Prefix = >> >> CallingLineId Presentation = >> >> CallingName Presentation = >> >> Calling Party Number = 610XXXXXXX Characters hidden >> >> ConnectedParty Transformations >> >> ConnectedLineId Presentation = >> >> ConnectedName Presentation = >> >> Called Party Transformations >> >> Called Party Mask = >> >> Discard Digits Instruction = >> >> Prefix = >> >> Called Number = >> >> Route Pattern :Pattern= 9.1[2-9]XX[2-9]XXXXXX >> >> Positional Match List = 1270XXXXXXX Characters hidden >> >> DialPlan = >> >> Route Filter >> >> Filter Name = >> >> Filter Clause = >> >> Require Forced Authorization Code = No >> >> Authorization Level = 0 >> >> Require Client Matter Code = No >> >> Call Classification = >> >> PreTransform Calling Party Number = 7579 >> >> PreTransform Called Party Number = 91270XXXXXXX Characters >> hidden >> >> Calling Party Transformations >> >> External Phone Number Mask = YES >> >> Calling Party Mask = >> >> Prefix = >> >> CallingLineId Presentation = Allowed >> >> CallingName Presentation = Default >> >> Calling Party Number = 610XXXXXXX Characters hidden >> >> ConnectedParty Transformations >> >> ConnectedLineId Presentation = Default >> >> ConnectedName Presentation = Default >> >> Called Party Transformations >> >> Called Party Mask = >> >> Discard Digits Instruction = PreDot >> >> Prefix = >> >> Called Number = 1270XXXXXXX Characters hidden >> >> Route List :Route List Name= Site-RL >> >> RouteGroup :RouteGroup Name= Site_Route_Group >> >> PreTransform Calling Party Number = 7579 >> >> PreTransform Called Party Number = 91270XXXXXXX >> Characters hidden >> >> Calling Party Transformations >> >> External Phone Number Mask = On >> >> Calling Party Mask = >> >> Prefix = >> >> Calling Party Number = >> >> Called Party Transformations >> >> Called Party Mask = >> >> Discard Digits Instructions = PreDot >> >> Prefix = >> >> Called Number = >> >> Device :Type= MGCPT1PRIPort >> >> End Device Name = S0/SU3/ds...@rtr-02.xxxxx.com >> >> PortNumber = 0 >> >> Device Status = Registered >> >> AAR Group Name = >> >> AAR Calling Search Space = >> >> AAR Prefix Digits = >> >> Call Classification = >> >> Calling Party Selection = >> >> CallingLinePresentation = >> >> ConnectedLinePresentation = >> >> Number Of Strip Digits = >> >> CallerID DN = >> >> >> On Thu, Jan 30, 2014 at 8:52 AM, Moataz Tolba <moataz_m...@yahoo.com>wrote: >> >>> Check if the route list get exhausted and need a rest >>> >>> Do you have traces for the failing call ? >>> >>> Moataz >>> >>> -----Original Message----- >>> From: Mike O'Nan <mdona...@gmail.com> >>> Sender: ccie_voice-boun...@onlinestudylist.com >>> Date: Thu, 30 Jan 2014 08:29:46 >>> To: <ccie_voice@onlinestudylist.com> >>> Subject: [OSL | CCIE_Voice] 2nd LD call fails >>> >>> _______________________________________________ >>> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: >>> >>> iPexpert on YouTube: www.youtube.com/ipexpertinc >>> >> >>
_______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
