Hi, There's no real conflict at all here, and I am surprised at the amount of time spent on this subject :)
I hope that people *do* mention which units they refer to and that they *don't* name new units without reasonable justification. If I encounter a situation where a number that is relevant to my work is mentioned without any units of measure then I am likely going to assume something based on what is customary, or perhaps on how I feel that day. If it's really important I would dig deeper. If things go bad I would of course blame it on the supplier of the ill-defined number. Maybe even write a snooty email or something. Or at least think about writing one, while eating icecream in bed directly from the container at 2AM at night. On the other hand if things go well then I will naturally be sure to mention how I bravely tackled the issue and won. Win-win either way, sorry about the expensive Mars probe. Personally I prefer to measure angles as pizza slices - 1 slice defined as "about" 36 degrees, but of course also depending on how hungry I am (sometimes one slice may be 180 or even 270 degrees). This convention also works well for temperature by the way. I do not intend to propose, insinuate, proselytize or enforce it in any way, for now... Artem -----Original Message----- From: CCP4 bulletin board [mailto:ccp...@jiscmail.ac.uk] On Behalf Of Dale Tronrud Sent: Monday, November 23, 2009 1:33 AM To: CCP4BB@JISCMAIL.AC.UK Subject: Re: [ccp4bb] units of the B factor Artem Evdokimov wrote: > The angle value and the associated basic trigonometric functions (sin, cos, > tan) are derived from a ratio of two lengths* and therefore are > dimensionless. > > It's trivial but important to mention that there is no absolute requirement > of units of any kind whatsoever with respect to angles or to the three basic > trigonometric functions. All the commonly used units come from (arbitrary) > scaling constants that in turn are derived purely from convenience - > specific calculations are conveniently carried out using specific units (be > they radians, points, seconds, grads, brads, or papaya seeds) however the > units themselves are there only for our convenience (unlike the absolutely > required units of mass, length, time etc.). > > Artem > > * angle - the ratio of the arc length to radius of the arc necessary to > bring the two rays forming the angle together; trig functions - the ratio of > the appropriate sides of a right triangle > While it is true that angles are defined by ratios which result in their values being independent of the units those lengths were measured, common sense says that a number is an insufficient description of an angle. If I tell you I measured an angle and its value is "1.5" you cannot perform any useful calculation with that knowledge. Yes it's true that the confusion does not arise from a mix up of feet and meters. I would have concluded my angle was 1.5 in either case. The confusion arises because there are differing conventions for describing that "unitless" angle. I could be describing my angle as 1.5 radians, 1.5 degrees, or 1.5 cycles (or 1.5 of the mysterious "grad" on my calculator). For me to communicate my result to you I would need to also tell you the convention I'm using, and you will have to perform a conversion to transform my value to your favorite convention. If it looks like a unit, and it quacks like a unit, I think I'm free to call it a unit. I think you will agree that if we fail to pass the convention along with it value our space probe will crash on Mars just as hard as if we had confused feet and meters. The result of a Sin or Cos calculation can be treated as "unitless" only because there is 100% agreement on how these results should be represented. Everyone agrees that the Sin of a right angle is 1. If I went off the deep end I could declare that the Sin of a right angle is 12 and I could construct an entirely self-consistent description of physics using that convention. In that case I would have to be very careful to keep track of when I was working with traditional Sin's and when with "crazy Tronrud Sin's". When switching between conventions I would have to careful to use the conversion factor of 12 "crazy Tronrud Sin's"/"traditional Sin" and I'd do best if I put a mark next to each value indicating which convention was used for that particular value. Sounds like units to me. Of course no one would create "crazy Tronrud Sin's" because the pain created by the confusion of multiple conventions is not compensated by any gain. When it comes to angles, however, that ship has sailed. While mathematicians have very good reasons for preferring the radian convention you are never going to convince a physicist to change from Angstrom/cycle to Angstrom/radian when measuring wavelengths. You will also fail to convince a crystallographer to measure fractional coordinates in radians. We are going to have to live in a world that has some angular quantities reported in radians and others in cycles. That means we will have to keep track of which is being used and apply the factor of 2 Pi radian/cycle or 1/(2 Pi) cycle/radian when switching between. I agree with Ian that the 8 Pi^2 factor in the conversion of <u_x^2> to B looks suspiciously like 2 (2 Pi)^2 and it is likely a conversion of cycle^2 to radian^2. I can even imagine that the derivation of effect of distortions of the lattice points that lead to these parameters would start with a description of these distortions in cycles, but I also have enough experience with this sort of problem to know that you can only be certain of these "units" after going back to the root definition and tracking the algebra forward. In my opinion the Mad Scientist is right. B and <u_x^2> represent the same quantity reported with different units (or conventions if you will) and the answer will be something like B in A^2 radian^2 and <u_x^2> in A^2 cycle^2. It would be much clearer it someone figured out exactly what those units are and we started properly stating the units of each. I'm sorry that I don't have the time myself for this project. Dale Tronrud P.S. As for your distinction between the "convenience" units used to measure angles and the "absolutely required" units of length and mass: all units are part of the coordinate systems that we humans impose on the universe. Length and mass are no more fundamental than angles. Feet and meters are units chosen for our convenience and one converts between them using an arbitrary scaling constant. In fact the whole distinction between length and mass is simply a matter of convenience. In the classic text on general relativity "Gravitation" by Miser, Thorne and Wheeler they have a table in the back of "Some Useful Numbers in Conventional and Geometrized Units" where it lists the mass of the Sun as 147600 cm and and the distance between the Earth and Sun as 499 sec. Those people in general relativity are great at manipulating coordinate systems! > -----Original Message----- > From: CCP4 bulletin board [mailto:ccp...@jiscmail.ac.uk] On Behalf Of Ian > Tickle > Sent: Sunday, November 22, 2009 10:57 AM > To: CCP4BB@JISCMAIL.AC.UK > Subject: Re: [ccp4bb] units of the B factor > > Back to the original problem: what are the units of B and >> <u_x^2>? I haven't been able to work that out. The first >> wack is to say the B occurs in the term >> >> Exp( -B (Sin(theta)/lambda)^2) >> >> and we've learned that the unit of Sin(theta)/lamda is 1/Angstrom >> and the argument of Exp, like Sin, must be radian. This means >> that the units of B must be A^2 radian. Since B = 8 Pi^2 <u_x^2> >> the units of 8 Pi^2 <u_x^2> must also be A^2 radian, but the >> units of <u_x^2> are determined by the units of 8 Pi^2. I >> can't figure out the units of that without understanding the >> defining equation, which is in the OPDXr somewhere. I suspect >> there are additional, hidden, units in that definition. The >> basic definition would start with the deviation of scattering >> points from the Miller planes and those deviations are probably >> defined in cycle or radian and later converted to Angstrom so >> there are conversion factors present from the beginning. >> >> I'm sure that if the MS sits down with the OPDXr and follows >> all these units through he will uncover the units of B, 8 Pi^2, >> and <u_x^2> and the mystery will be solved. If he doesn't do >> it, I'll have to sit down with the book myself, and that will >> make my head hurt. > > Hi Dale > > A nice entertaining read for a Sunday afternoon, but I think you can > only get so far with this argument and then it breaks down, as evidenced > by the fact that eventually you got stuck! I think the problem arises > in your assertion that the argument of 'exp' must be in units of > radians. IMO it can also be in units of radians^2 (or radians^n where n > is any unitless number, integer or real, including zero for that > matter!) - and this seems to be precisely what happens here. Having a > function whose argument can apparently have any one of an infinite > number of units is somewhat of an embarrassment! - of course that must > mean that the argument actually has no units. So in essence I'm saying > that quantities in radians have to be treated as unitless, contrary to > your earlier assertions. > > So the 'units' (accepting for the moment that the radian is a valid > unit) of B are actually A^2 radian^2, and so the 'units' of 8pi^2 (it > comes from 2(2pi)^2) are radian^2 as expected. However since I think > I've demonstrated that the radian is not a valid unit, then the units of > B are indeed A^2! > > Cheers > > -- Ian > > > Disclaimer > This communication is confidential and may contain privileged information > intended solely for the named addressee(s). It may not be used or disclosed > except for the purpose for which it has been sent. If you are not the > intended recipient you must not review, use, disclose, copy, distribute or > take any action in reliance upon it. If you have received this communication > in error, please notify Astex Therapeutics Ltd by emailing > i.tic...@astex-therapeutics.com and destroy all copies of the message and > any attached documents. > Astex Therapeutics Ltd monitors, controls and protects all its messaging > traffic in compliance with its corporate email policy. The Company accepts > no liability or responsibility for any onward transmission or use of emails > and attachments having left the Astex Therapeutics domain. Unless expressly > stated, opinions in this message are those of the individual sender and not > of Astex Therapeutics Ltd. The recipient should check this email and any > attachments for the presence of computer viruses. Astex Therapeutics Ltd > accepts no liability for damage caused by any virus transmitted by this > email. E-mail is susceptible to data corruption, interception, unauthorized > amendment, and tampering, Astex Therapeutics Ltd only send and receive > e-mails on the basis that the Company is not liable for any such alteration > or any consequences thereof. > Astex Therapeutics Ltd., Registered in England at 436 Cambridge Science > Park, Cambridge CB4 0QA under number 3751674