*CALL FOR PROPOSALS FOR ESRF BEAM TIME WITH ONLINE MICROSPEC*
Proposal Deadline *21st October 2011*
There will be beam time available at the ESRF for MX data collection
with a setup that allows online monitoring of UV/VIS absorbance or
fluorescence spectral changes of the crystal during the X-ray
diffraction experiment. Users who are interested in using this beam time
(including those who are members of BAG Groups) should use the following
mechanism:
_http://www.esrf.fr/UsersAndScience/UserGuide/Applying/ProposalGuidelines/MXnon-BAGproposal
_
and *it must be clearly indicated in the title of the proposal form that
the online monitoring of spectral changes is necessary for the project*.
A brief description of the device is given below however users are
encouraged to consult the web pages for detailed information:
_http://www.esrf.fr/UsersAndScience/Experiments/MX/How_to_use_our_beamlines/Run_Your_Experiment/Microspectrophotometer_User_Guide_
The device is also described in: McGeehan, J., Ravelli, R.B., Murray,
J.W., Owen, R.L., Cipriani, F., McSweeney, S., Weik, M. and Garman, E.F.
(2009) Colouring cryo-cooled crystals: online microspectrophotometry. J
Synchrotron Radiat., 16, 163-172.
As this is not a standard set-up, it might take a significant amount of
time to train users, align the device, and analyze the data in order to
derive relevant data collection schemes. *We will therefore schedule 24
hours for each project*. The *deadline *for this specific application is
*Friday 21st October 2011*.
It is strongly recommended to, beforehand, record an absorption
(fluorescence) spectrum of the crystal on a home microspectrophotometer
such as the 4dx one, or at an off-line facility such as the ESRF
Cryobench, and to provide it in the application form. Such a spectrum
would greatly help to determine the feasibility of the experiment. For
optimal experimental conditions, crystals should be frozen in minimal
amounts of cryosolution, especially when the crystals are small.
Finally, please note that *the ESRF sample changer cannot be operated at
the same time as the on-line microspec*.
The use of specific LASER is possible if the device is compliant with
the beam line safety system (interlock on device power).
++++++++++++
Dates of beam-time: *30th November - 4th December 2011*
Storage Ring: 7/8 + 1 (200mA)
Beamline: ID14-1
Energy: 13.27 keV (not tunable)
Specifications:
UV/VIS-range: 250-1100 nm
Light source: Mikropack DH-2000-BAL (Deuterium/Halogen)
Fluorescence/Actinic excitation wavelength: 405, 440, 473, 532, 561, 671 nm
ODmax for UV-vis absorbance spectra: 2-2.5
Monitoring light size: 0.03 (min) - 0.15mm(max)
Sampling freq (to disk): 10Hz or lower
--
Dr David FLOT
Beam-Line Operation Manager Tel : (+33) 4 76 88 17 63
Structural Biology Group Fax : (+33) 4 76 88 26 24
ESRF
B.P. 220, 6 rue Jules Horowitz e-mail :david.f...@esrf.fr
F-38043 GRENOBLE CEDEX http://www.esrf.eu